803-001-0002
803embedded·803-001-0002
About the 803-001-0002 PCB
803-001-0002 is an open source PCB design by 803embedded, published on GitHub. It is a 2-layer board measuring 74 × 39 mm, with 10 components from 7 distinct parts.
By type, the board carries 4 connectors, 3 capacitors and 1 resistor.
It belongs with the rf & radio designs in this gallery.
From the project
Variant of 0001 that supports Digi cell radios
This KiCad 9 project is a native reconstruction of 803-001-001-B from its released ODB++ manufacturing data. Connector and mounting-hole locations, board outline, signal routing, ground copper, and artwork are carried over from Rev B.
The original C3 10 uF / 1206 capacitor is replaced by:
- C3: 220 uF, 16 V, polymer tantalum, 7343-31 - KEMET T521D227M016ATE025 (25 mΩ ESR) - Digi-Key 399-T521D227M016ATE025CT-ND
803-001-0002 bill of materials (BOM)
10 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SSQ-108-03-G-D Samtec Inc. | PinSocket_2x08_P2.54mm_Vertical | J1, J2 |
| 2 | M22-7131042 Harwin Inc. | PinSocket_1x10_P2.00mm_Vertical | J3, J4 |
| 2 | 9774070943R Würth Elektronik | Mounting_Wuerth_WA-SMST-2.25mm_H7mm_9774070943 | MP1, MP2 |
| 1 | C0603C470J5GACTU 47pF KEMET | C_0603_1608Metric | C1 |
| 1 | GCM188R71E105KA64J 1uF Murata Electronics | C_0603_1608Metric | C2 |
| 1 | T521D227M016ATE025 220uF 16V KEMET | CP_EIA-7343-31_Kemet-D | C3 |
| 1 | RC0603FR-0710KL 10k YAGEO | R_0603_1608Metric | R1 |
803-001-0002 design files
The KiCad project lives in the 803embedded/803-001-0002 repository on GitHub; these links point at the commit this page was built from.
- Layout803-001-002-A.kicad_pcb
- Schematic803-001-002-A.kicad_sch
- BOM803-001-002-A_BOM.csv
803-001-0002: common questions
How big is the 803-001-0002 PCB?
The 803-001-0002 measures 74 × 39 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 803-001-0002?
10 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 803-001-0002 design files?
From the 803embedded/803-001-0002 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 803-001-0002 design in my own project?
The repository has no license, so all rights stay with 803embedded. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568