234 open source boards using the MCP73831-2-OT
Real designs built with the MCP73831-2-OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Microchip SAM
NFC-Copy-Cat
ElectronicCats
40.4 × 43 mm38 parts2LGPL-3.0148ESP32
Communicator
Hack-a-Day
148 × 81 mm47 parts2LMIT105RP2040/RP2350
XSense
lithiumice
30.8 × 46.9 mm74 parts4LNo license92ESP32
ICE-V-Wireless
ICE-V-Wireless
81.7 × 31.8 mm78 parts4LMIT82RP2040/RP2350
GameTiger
codetiger
81.3 × 99.8 mm70 parts2LMIT79Nordic nRF
UECG rev4
ultimaterobotics
63 × 22 mm68 parts2LMIT77SIM868 Based GSM+GPRS+GNSS+BT Module
vul-os
38.1 × 38.1 mm62 parts2LApache-2.055ESP32
Hardware design
Open-Authenticator
82 × 42 mm56 parts2LMIT42ESP32
Timeleapcam
hnz1102
40 × 50 mm90 parts4LNo license39RP2040/RP2350
Double oh
heyspacebuck
49.2 × 9 mm51 parts2LCERN-OHL-1.237AVR/Arduino
Gpstracker
blemasle
79.3 × 59.2 mm65 parts2LMIT33ESP32
USBee32-S2
dhairyashah1
28.1 × 68.3 mm47 parts2LMIT31ESP32
Combadge
Pippadi
33.7 × 31 mm34 parts2LGPL-3.020Microchip SAM
Silver
Foalyy
69 × 31 mm95 parts4LGPL-3.018ESP32
Ducky board-ESP32-S3-with-1.52-inch e paper display
MakersFunDuck
34.8 × 65.9 mm95 parts2LGPL-3.018ESP32
Current logger
hnz1102
50 × 70 mm64 parts2LNo license18Sim7080 dev board
techstudio-design
38.5 × 47 mm51 parts4LNo license17Lir2450-charger
rbaron
40.6 × 28.7 mm12 parts2LCC-BY-SA-4.017ESP32
ESP32C3 FPGA
emeb
76.2 × 31.8 mm85 parts4LMIT16ESP32
A0 IoT GATEWAY
absmach
54.6 × 86.3 mm57 parts4LApache-2.016RP2040/RP2350
Pilot Oriented Navigation System
MasaoC
55.4 × 77.6 mm120 parts4LMIT15ESP32
Nomad
0Zane
65 × 120 mm69 parts2LMIT15AVR/Arduino
Keyboard
dragonlock2
200 × 100 mm225 parts2LApache-2.013VhARIO-ESPC3
har-in-air
74 × 34 mm52 parts2LGPL-3.013ESP32
Mini current meter
hnz1102
30 × 43 mm38 parts2LNo license10AVR/Arduino
Bell-Boy
BBUK
64 × 30 mm31 parts2LTAPR-OHL-1.010Bms buck boost
tor1kk
35.1 × 28.9 mm34 parts2LGPL-3.09BLe-Chiffre
tominabox1
244.1 × 89.7 mm96 parts2LMIT6ESP32
RoboDojo
Amoskeag
60 × 60 mm63 parts4LBSD-2-Clause6Din power atm90e26
whatnick
86.9 × 32.8 mm59 parts2LNo license6Nordic nRF
Mk2
jeffc
23.5 × 37.5 mm49 parts2LNo license6AVR/Arduino
LoRa Dev Board RN2483
Open-Things-Network
63.5 × 43 mm35 parts2LMIT6ESP32
Esp32-faerfly-V2.0
low-poly-studio
85.1 × 53.3 mm83 parts4LNo license5ESP32
Temp logger
hnz1102
50 × 70 mm52 parts2LNo license5Microchip SAM
CFWatch
Dragon863
37 × 39.8 mm47 parts2LNo license5
How designs wire the MCP73831-2-OT
Read from the KiCad layouts of 197 open source designs, one per repository: what each pin of the MCP73831-2-OT connects to, and the resistors, capacitors and other passives placed on it.
- The PROG pin has a resistor to GND on 188 of 197 designs, most often 2 kΩ (then 10 kΩ).
- The VBAT pin has a decoupling capacitor on 148 of 197 designs, most often 4.7 µF (then 10 µF).
- The VDD pin has a decoupling capacitor on 130 of 197 designs, most often 4.7 µF (then 10 µF).
- The STAT pin has a series resistor on 106 of 197 designs, most often 1 kΩ (then 470 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| STATpin 1 | Connected to: Signal 91% |
|
| VSSpin 2 | Connected to: GND 98% | — |
| VBATpin 3 | Connected to: BATT 71% · a signal 29% |
|
| VDDpin 4 | Connected to: VBUS 72% · a signal 27% |
|
| PROGpin 5 | Connected to: Signal 99% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Board by dennisss, Remote by OMOTE-Community, NFC-Copy-Cat by ElectronicCats and Communicator pcb by Hack-a-Day.
The MCP73831-2-OT in open source designs
The gallery holds 234 open source boards using the MCP73831-2-OT from 199 GitHub repositories; a typical one measures about 51.8 × 51 mm and carries around 55 components.
70% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Board by dennisss.
Parts used alongside the MCP73831-2-OT
Microcontrollers on boards using the MCP73831-2-OT
What boards using the MCP73831-2-OT are built for
MCP73831-2-OT: common questions
Where can I find a MCP73831-2-OT reference design?
Each of the 234 boards on this page is a real design using the MCP73831-2-OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MCP73831-2-OT PROG pin?
The PROG pin has a resistor to GND on 188 of 197 designs, most often 2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 197 open source designs using the MCP73831-2-OT.
What decoupling capacitors do designs use on the MCP73831-2-OT VBAT pin?
The VBAT pin has a decoupling capacitor on 148 of 197 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 197 open source designs using the MCP73831-2-OT.
What decoupling capacitors do designs use on the MCP73831-2-OT VDD pin?
The VDD pin has a decoupling capacitor on 130 of 197 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 197 open source designs using the MCP73831-2-OT.
What parts are used alongside the MCP73831-2-OT?
The AP2112K-3.3, USBLC6-2SC6, W25Q128JVS, ESP32-S3-WROOM-1 and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the MCP73831-2-OT use?
Most are built on ESP32 (103), RP2040/RP2350 (35), AVR/Arduino (13) and STM32 (12).
How big is a typical board using the MCP73831-2-OT?
The median is 51.8 × 51 mm, and 70% are two-layer designs.
What is the most popular open source board using the MCP73831-2-OT?
By GitHub stars, Board by dennisss, with 381 stars.
Can I simulate one of these boards using the MCP73831-2-OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.