Iot tap sensing
aahmad-p·iot_tap_sensing·ECAD/sensor_board/sensor_board.kicad_pcb
About the Iot tap sensing PCB
Iot tap sensing is an open source PCB design by aahmad-p, published on GitHub. It is a 2-layer board measuring 40.6 × 30.6 mm, with 29 components from 21 distinct parts.
Other key parts include the C2870554 and C2681320. By type, the board carries 9 resistors, 6 capacitors, 5 jumpers, 3 transistors, 2 ICs and 1 crystal.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
This repository contains an unorganized but complete copy of the code for an IoT Tap Sensing System.
Main components on the Iot tap sensing
Iot tap sensing bill of materials (BOM)
29 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2870554 TPL5111 | SOT-23-6 | U1 |
| 1 | C2681320 TPS22917DBV | SOT-23-6 | U2 |
| 2 | PMV48XP | SOT-23 | Q2, Q3 |
| 1 | C916396 2N7002 | SOT-23 | Q4 |
| 1 | Q13FC1350000400 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | C161861 S4B-XH-SM4-TB | CONN4_S4B-XH_JST | J4 |
| 1 | 3034TR | BAT_3034TR | BT2 |
| 1 | Sold_Jump_C | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 2 | ~ | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2, JP3 |
| 1 | Sold_Jump_O | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | ~ | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | PESD5V0V1BA,115 5V | D_SOD-323 | D1 |
| 1 | ~ | C_0603_1608Metric | C1 |
| 2 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C2, C3 |
| 2 | 0402CG120J500NT 12pF C0G | C_0402_1005Metric | C9, C10 |
| 1 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C11 |
| 1 | 0603WAF100JT5E 10R | R_0603_1608Metric | R1 |
| 3 | CR0603FA3303G 330k | R_0603_1608Metric | R2, R4, R9 |
| 1 | ~ | R_0603_1608Metric | R3 |
| 2 | 0603WAF2202T5E 22k | R_0603_1608Metric | R6, R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0603WAF1003T5E 100k | R_0603_1608Metric | R12, R13 |
Iot tap sensing design files
The KiCad project lives in the aahmad-p/iot_tap_sensing repository on GitHub; these links point at the commit this page was built from.
Iot tap sensing: common questions
How big is the Iot tap sensing PCB?
The Iot tap sensing measures 40.6 × 30.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Iot tap sensing?
29 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Iot tap sensing design files?
From the aahmad-p/iot_tap_sensing repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Iot tap sensing design in my own project?
The repository has no license, so all rights stay with aahmad-p. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k