Sensors
StuckAtPrototype·Racer·hardware/racer-sensors/sensors.kicad_pcb
About the Sensors PCB
Sensors is an open source PCB design by StuckAtPrototype, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 15.2 × 9 mm, with 14 components from 8 distinct parts.
Other key parts include the OPT4060DTSR and HAL1501SU-A. By type, the board carries 6 resistors, 3 capacitors, 2 ICs, 2 diodes and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
thank you for the overwhelmingly positve support!! such an inspiration to keep making fun open source content!
thank you for the overwhelmingly positve support!! such an inspiration to keep making fun open source content!
https://github.com/StuckAtPrototype/Thumbtroller
These are structured into their own files. I could have used submodules, but decided against it.
This folder has all the python code you'd need to train up your own neural network for the car. It also consists scripts that let you drive it using a keyboard -- just in case you dont want to make a physical controller.

Main components on the Sensors
Sensors bill of materials (BOM)
14 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPT4060DTSR | FCSOT8_DTS_TEX | U1 |
| 1 | HAL1501SU-A | SOT-23_TO-236_TDK | U2 |
| 1 | CONN_02X03_SMT Conn_02x03_SMT | PinHeader_2x03_P1.27mm_Vertical_SMD | J1 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 2 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C2 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C3 |
| 2 | 470 | R_0603_1608Metric | R1, R2 |
| 4 | 10K | R_0603_1608Metric | R3, R4, R5, R6 |
Sensors design files
The KiCad project lives in the StuckAtPrototype/Racer repository on GitHub; these links point at the commit this page was built from.
Sensors: common questions
How big is the Sensors PCB?
The Sensors measures 15.2 × 9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Sensors?
14 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sensors design files?
From the StuckAtPrototype/Racer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sensors design in my own project?
Yes, under the terms of its Apache-2.0 license, which StuckAtPrototype chose for the repository.
More boards in Racer
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956