MES4-MCU

aaronraj11·MES4-MCU

MES4-MCU PCB layout, top view — open source STM32 board by aaronraj11

About the MES4-MCU PCB

MES4-MCU is an open source STM32 PCB design by aaronraj11, published on GitHub. It is a 4-layer board measuring 22 × 42 mm, with 40 components from 23 distinct parts.

Its main chip is the STM32G0B1KBT6, from the STM32 family. Other key parts include the TLV76733DRVR and SN65HVD230DR. By type, the board carries 14 resistors, 10 capacitors, 4 transistors, 4 LEDs, 3 ICs and 3 diodes.

From the project

A small STM32G0B1 microcontroller module with CAN, built as an M.2 2242 (B-key) card.

A small STM32G0B1 microcontroller module with CAN, built as an M.2 2242 (B-key) card.

Odd fingers are on the top side, even fingers on the bottom side. All signals are 3.3 V logic.

- Power: supply 5 V on fingers 20/22 only. The module makes its own 3.3 V. Power down before inserting or removing it. - Programming / debug: SWD (fingers 7/9/11) with finger 4 as the target voltage reference. The UART on fingers 6/8 is handy as a debug console. - CAN termination: a CAN bus needs exactly two 120 Ω terminators, one at each end of the cable. Bridge solder jumper JP1 only if this module sits at an…

MES4-MCU, from the project README
From the project README

Main components on the MES4-MCU

MES4-MCU bill of materials (BOM)

40 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G0B1KBT6
STMicroelectronics
U1
1
TLV76733DRVR
Texas Instruments
U2
1
SN65HVD230DR
Texas Instruments
U3
3
MMBT3904
Jiangsu Changjing (CJ)
Q1, Q2, Q4
1
AO3400A
Alpha & Omega
Q3
1
SX2M8.000M20F30TNN
8MHz SX2M8.000M20F30TNN
SCTF
X1
1
KLJ-5018-5040
Changzhou Keliking (KELIKING)
BZ1
1
NCD0805R1
Red
Foshan NationStar
LED1
1
KT-0805G
Green
Hubei KENTO
LED2
1
KT-0805W
White
Hubei KENTO
LED3
1
KT-0805Y
Yellow
Hubei KENTO
LED4
1
NUP2105LT1G
onsemi
D1
1
SMF6.0A
Hongjiacheng
D2
1
1N4148WS
Jiangsu Changjing (CJ)
D3
3
CL21A106KAYNNNE
10uF 25V
Samsung
C1, C2, C5
7
CL05B104KO5NNNC
100nF
Samsung
C3, C4, C6, C7, C8, C9, C10
4
0402WGF1001TCE
1k
UNI-ROYAL
R1, R2, R3, R4
5
0402WGF1002TCE
10k
UNI-ROYAL
R5, R6, R9, R13, R15
1
0603WAF1200T5E
120
UNI-ROYAL
R7
1
0402WGF2002TCE
20k
UNI-ROYAL
R8
Show 3 more
QtyPartRefs
1
0402WGF4701TCE
4.7k
UNI-ROYAL
R12
1
0402WGF220JTCE
22
UNI-ROYAL
R14
1
0402WGF0000TCE
0
UNI-ROYAL
R16

MES4-MCU design files

The KiCad project lives in the aaronraj11/MES4-MCU repository on GitHub; these links point at the commit this page was built from.

MES4-MCU: common questions

What microcontroller does the MES4-MCU use?

The MES4-MCU is built around the STM32G0B1KBT6, from the STM32 family.

How big is the MES4-MCU PCB?

The MES4-MCU measures 22 × 42 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the MES4-MCU?

40 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MES4-MCU design files?

From the aaronraj11/MES4-MCU repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MES4-MCU design in my own project?

The repository has no license, so all rights stay with aaronraj11. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MES4-MCU without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards