2 open source boards using the STM32G0B1KBT6
Real designs built with the STM32G0B1KBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Pando - Left
jyap808
144.1 × 121.5 mm88 parts2LCERN-OHL-S-2.010STM32
MES4-MCU
aaronraj11
22 × 42 mm40 parts4LNo license0
The STM32G0B1KBT6 in open source designs
The gallery holds 2 open source boards using the STM32G0B1KBT6 from 2 GitHub repositories; a typical one measures about 83 × 81.7 mm and carries around 64 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Pando - Left by jyap808.
Microcontrollers on boards using the STM32G0B1KBT6
What boards using the STM32G0B1KBT6 are built for
STM32G0B1KBT6: common questions
Where can I find a STM32G0B1KBT6 reference design?
Each of the 2 boards on this page is a real design using the STM32G0B1KBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32G0B1KBT6 use?
Most are built on STM32 (2).
How big is a typical board using the STM32G0B1KBT6?
The median is 83 × 81.7 mm, and 50% are two-layer designs.
What is the most popular open source board using the STM32G0B1KBT6?
By GitHub stars, Pando - Left by jyap808, with 10 stars.
Can I simulate one of these boards using the STM32G0B1KBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.