28 open source boards using the TLV76733DRVR

Real designs built with the TLV76733DRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

28 boardsClear filters|Most starred

How designs wire the TLV76733DRVR

Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the TLV76733DRVR connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT_1 pin is tied to 3.3V on 19 of 19 designs.
  • The SNS pin is tied to 3.3V on 19 of 19 designs.
  • The EN_4 pin is tied to 10V on 17 of 19 designs (a signal on 2).
  • The IN_6 pin is tied to 10V on 17 of 19 designs (a signal on 2).
OUT_1pin 1Connected to: 3.3V 100%
SNSpin 2Connected to: 3.3V 100%
GND_3pin 3Connected to: GND 100%
EN_4pin 4Connected to: 10V 89%
GND_5pin 5Connected to: GND 100%
IN_6pin 6Connected to: 10V 89%
EP_7pin 7Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AxxSolder by AxxAxx, OpenESC-20x20 by OpenDrone-hw, CawDrive by noxrick91 and 4in1 by OpenDrone-hw.

The TLV76733DRVR in open source designs

The gallery holds 28 open source boards using the TLV76733DRVR from 21 GitHub repositories; a typical one measures about 41.6 × 46.5 mm and carries around 109 components.

74% use four copper layers or more, and 36% carry an open source license.

The most starred is AxxSolder by AxxAxx.

Microcontrollers on boards using the TLV76733DRVR

TLV76733DRVR: common questions

Where can I find a TLV76733DRVR reference design?

Each of the 28 boards on this page is a real design using the TLV76733DRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV76733DRVR OUT_1 pin connected?

The OUT_1 pin is tied to 3.3V on 19 of 19 designs. Counted from the KiCad layouts of 19 open source designs using the TLV76733DRVR.

How is the TLV76733DRVR SNS pin connected?

The SNS pin is tied to 3.3V on 19 of 19 designs. Counted from the KiCad layouts of 19 open source designs using the TLV76733DRVR.

How is the TLV76733DRVR EN_4 pin connected?

The EN_4 pin is tied to 10V on 17 of 19 designs (a signal on 2). Counted from the KiCad layouts of 19 open source designs using the TLV76733DRVR.

What parts are used alongside the TLV76733DRVR?

The AT32F421G8U7, LMR54406DBVR, NSG2065Q, INA186A3IDCKR and FTC160808S4R7MBCA appear in the most repositories here.

Which microcontrollers do boards using the TLV76733DRVR use?

Most are built on STM32 (8), RP2040/RP2350 (5) and ESP32 (4).

How big is a typical board using the TLV76733DRVR?

The median is 41.6 × 46.5 mm, and 26% are two-layer designs.

What is the most popular open source board using the TLV76733DRVR?

By GitHub stars, AxxSolder by AxxAxx, with 1,714 stars.

Can I simulate one of these boards using the TLV76733DRVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part