Screen accessory board v1.0

abeednaz·R56-Mini-MFD·PCBs/Screen accessory board/Screen accessory board v1.0/Screen accessory board v1.0.kicad_pcb

Screen accessory board v1.0 layout, top view — open source board by abeednaz

About the Screen accessory board v1.0

Screen accessory board v1.0 is an open source PCB design by abeednaz, published on GitHub. It is a 2-layer board measuring 50 × 56.8 mm, with 9 components from 8 distinct parts.

By type, the board carries 3 resistors, 2 connectors, 2 switches, 1 diode and 1 capacitor.

It belongs with the displays & leds, power & battery and sensors designs in this gallery.

From the project

Multi function display for R56 MINI Cooper

The connector board reroutes the battery power (pin 16) through a MOSFET switch triggered by the ignition signal (pin 1). The 12V switched power line is distributed to an ELM327 OBD-II code scanner, a 12V DC power connector, and a 12V--5V buck converter to power the gauge electronics. This allows the code scanner and gauge to only be switched on while the vehicle is in accesory mode or the engine is running, reducing the parasitic battery drain while the vehicle is off to ~145 nW.

Screen accessory board v1.0, from the project README
From the project README

Screen accessory board v1.0 bill of materials (BOM)

9 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x08_Pin
J1
1
Conn_01x02_Socket
J2
1
1825910-6
SW1
1
SW_SPDT
SW2
1
1N5817
D1
1
0.1uF
C1
2
10k
R1, R2
1
LDR
R3

Screen accessory board v1.0 design files

The KiCad project lives in the abeednaz/R56-Mini-MFD repository on GitHub; these links point at the commit this page was built from.

Screen accessory board v1.0: common questions

How big is the Screen accessory board v1.0?

The Screen accessory board v1.0 measures 50 × 56.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Screen accessory board v1.0?

9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Screen accessory board v1.0 design files?

From the abeednaz/R56-Mini-MFD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Screen accessory board v1.0 design in my own project?

The repository has no license, so all rights stay with abeednaz. Use it as a reference, and ask the author before reusing the design.

More boards in R56-Mini-MFD

Similar boards