V2.7-Connector board

abeednaz·R56-Mini-MFD·PCBs/OBD port power distribution board/V2.7-Connector-board/V2.7-Connector-board.kicad_pcb

V2.7-Connector board layout, top view — open source board by abeednaz

About the V2.7-Connector board

V2.7-Connector board is an open source PCB design by abeednaz, published on GitHub. It is a 2-layer board measuring 32.1 × 61.3 mm, with 10 components from 9 distinct parts.

Other key parts include the TSR_1-2450. By type, the board carries 4 connectors, 2 transistors, 2 resistors, 1 IC and 1 switch.

It belongs with the displays & leds, power & battery and sensors designs in this gallery.

From the project

Multi function display for R56 MINI Cooper

The connector board reroutes the battery power (pin 16) through a MOSFET switch triggered by the ignition signal (pin 1). The 12V switched power line is distributed to an ELM327 OBD-II code scanner, a 12V DC power connector, and a 12V--5V buck converter to power the gauge electronics. This allows the code scanner and gauge to only be switched on while the vehicle is in accesory mode or the engine is running, reducing the parasitic battery drain while the vehicle is off to ~145 nW.

V2.7-Connector board, from the project README
From the project README

Main components on the V2.7-Connector board

V2.7-Connector board bill of materials (BOM)

10 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TSR_1-2450
U1
1
IRF540N
Q1
1
IRF9540N
Q2
1
Conn_02x08_Top_Bottom
J1
1
Conn_02x08_J1962_Male
J2
2
Conn_01x02_Socket
J3, J4
1
SW_SPDT
SW1
1
10k
R1
1
1Meg
R2

V2.7-Connector board design files

The KiCad project lives in the abeednaz/R56-Mini-MFD repository on GitHub; these links point at the commit this page was built from.

V2.7-Connector board: common questions

How big is the V2.7-Connector board?

The V2.7-Connector board measures 32.1 × 61.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the V2.7-Connector board?

10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the V2.7-Connector board design files?

From the abeednaz/R56-Mini-MFD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the V2.7-Connector board design in my own project?

The repository has no license, so all rights stay with abeednaz. Use it as a reference, and ask the author before reusing the design.

More boards in R56-Mini-MFD

Similar boards