STM32-Blue-Pill-Clone

Abhi90808·STM32-Blue-Pill-Clone

STM32-Blue-Pill-Clone PCB layout, top view — open source STM32 board by Abhi90808

About the STM32-Blue-Pill-Clone PCB

STM32-Blue-Pill-Clone is an open source STM32 PCB design by Abhi90808, published on GitHub. It is a 2-layer board measuring 53.1 × 23.8 mm, with 33 components from 20 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 16 capacitors, 6 connectors, 5 resistors, 2 ICs, 2 crystals and 2 diodes.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Custom recreation of the popular STM32F103C8T6 "Blue Pill" development board with improved layout, decoupling, and optional USB support.

A custom recreation of the popular STM32F103C8T6 "Blue Pill" ARM Cortex-M3 development board, designed in KiCad 8 with improved layout, better decoupling, and optional USB support.

The STM32F103C8T6 is clocked by an 8MHz external crystal, which the internal PLL multiplies to 72MHz. Programming is done via the SWD header using ST-Link V2. The USB port supports DFU bootloader flashing without an external programmer.

Main components on the STM32-Blue-Pill-Clone

STM32-Blue-Pill-Clone bill of materials (BOM)

33 components, 20 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103C8T6
U2
1
8MHz
Y1
1
32.768kHz
Y2
1
USB_B_Micro
J1
1
BOOT0_SEL
J2
1
BOOT1_SEL
J3
1
SWD
J4
1
LEFT_HEADER
J5
1
RIGHT_HEADER
J6
1
1N5819
D1
1
PWR_LED
D2
2
10uF
C1, C3
8
100nf
C2, C4, C5, C6, C7, C8, C9, C16
2
1uf
C10, C11
2
20PF
C12, C13
2
12.5pF
C14, C15
1
1k
R1
3
10k
R2, R4, R5
1
1.5K
R3

STM32-Blue-Pill-Clone design files

The KiCad project lives in the Abhi90808/STM32-Blue-Pill-Clone repository on GitHub; these links point at the commit this page was built from.

STM32-Blue-Pill-Clone: common questions

What microcontroller does the STM32-Blue-Pill-Clone use?

The STM32-Blue-Pill-Clone is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32-Blue-Pill-Clone PCB?

The STM32-Blue-Pill-Clone measures 53.1 × 23.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-Blue-Pill-Clone?

33 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32-Blue-Pill-Clone design files?

From the Abhi90808/STM32-Blue-Pill-Clone repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32-Blue-Pill-Clone design in my own project?

The repository has no license, so all rights stay with Abhi90808. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-Blue-Pill-Clone without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards