Mojo-V3-dev boards
abzman·Mojo-V3-dev-boards·5v levelshifter board/5v levelshifter board.kicad_pcb
About the Mojo-V3-dev boards PCB
Mojo-V3-dev boards is an open source PCB design by abzman, published on GitHub under the Unlicense license. It is a 2-layer board measuring 63.5 × 78.7 mm, with 43 components from 23 distinct parts.
Other key parts include the MAX3002EUP+T. By type, the board carries 14 capacitors, 13 connectors, 8 ICs and 8 jumpers.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
boards to use my mojo v3 as a development system for other FPGA projects
5v levelshifter bard can be purchased from PCBway here: https://www.pcbway.com/project/shareproject/64bitbidirectional5vshieldformojoV3_945b0e26.html
Main components on the Mojo-V3-dev boards
Mojo-V3-dev boards bill of materials (BOM)
43 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | MAX3002EUP+T | SOP65P640X110-20N | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8 |
| 1 | 5v coupling | PinHeader_2x01_P2.54mm_Vertical | J1 |
| 1 | JTAG | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | JTAG voltage | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | 0-7 | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | 8-15 | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | 16-23 | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | 24-31 | PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | 32-39 | PinHeader_1x08_P2.54mm_Vertical | J8 |
| 1 | 40-47 | PinHeader_1x08_P2.54mm_Vertical | J9 |
| 1 | 48-55 | PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | 56-63 | PinHeader_1x08_P2.54mm_Vertical | J11 |
| 1 | reference voltage | PinHeader_2x01_P2.54mm_Vertical | J12 |
| 1 | MOJO | Mojo | P1 |
| 1 | ena_0 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | ena_1 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | ena_2 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
| 1 | ena_3 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP4 |
| 1 | ena_4 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP5 |
| 1 | ena_5 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP6 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ena_6 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP7 |
| 1 | ena_7 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP8 |
| 14 | 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +6 |
Mojo-V3-dev boards design files
The KiCad project lives in the abzman/Mojo-V3-dev-boards repository on GitHub; these links point at the commit this page was built from.
Mojo-V3-dev boards: common questions
How big is the Mojo-V3-dev boards PCB?
The Mojo-V3-dev boards measures 63.5 × 78.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mojo-V3-dev boards?
43 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mojo-V3-dev boards design files?
From the abzman/Mojo-V3-dev-boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mojo-V3-dev boards design in my own project?
Yes, under the terms of its Unlicense license, which abzman chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979