EX08

adampisula·modmidi·boards/EX08/hardware/EX08.kicad_pcb

EX08 PCB layout, top view — open source board by adampisula

About the EX08 PCB

EX08 is an open source PCB design by adampisula, published on GitHub under the MIT license. It is a 2-layer board measuring 41.3 × 14 mm, with 12 components from 4 distinct parts.

From the project

EX08 is a passive wiring/extension board for connecting ModMIDI modules. It contains no MCU, so it has no PlatformIO project, firmware, or flashing procedure.

EX08 is a passive wiring/extension board for connecting ModMIDI modules. It contains no MCU, so it has no PlatformIO project, firmware, or flashing procedure.

Revision: 1, dated 2025-02-15 in the schematic title block.

The schematic shows four 5-pin input/output connectors and eight 5-pin pogo connectors. Each carries the shared ModMIDI module signals:

This is a passive interconnect board; observe the schematic's connector pin numbering, orientation, and power distribution when wiring it. Do not treat the signal list as a pin-order table.

EX08 bill of materials (BOM)

12 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
9
01x05
J_IN1, J_POGO_F1, J_POGO_F2, J_POGO_F3, J_POGO_F4, J_POGO_M1, J_POGO_M2, J_POGO_M3 +1
1
01x05
J_IN2
1
01x05
J_OUT1
1
01x05
J_OUT2

EX08 design files

The KiCad project lives in the adampisula/modmidi repository on GitHub; these links point at the commit this page was built from.

EX08: common questions

How big is the EX08 PCB?

The EX08 measures 41.3 × 14 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EX08?

12 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EX08 design files?

From the adampisula/modmidi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EX08 design in my own project?

Yes, under the terms of its MIT license, which adampisula chose for the repository.

More boards in modmidi