MM00
adampisula·modmidi·boards/MM00/hardware/MM00.kicad_pcb
About the MM00 PCB
MM00 is an open source STM32 PCB design by adampisula, published on GitHub under the MIT license. It is a 2-layer board measuring 58.4 × 38.1 mm, with 55 components from 29 distinct parts.
Its main chip is the STM32F103C_8-B_Tx, from the STM32 family. Other key parts include the USBLC6-4SC6, LM66100DCK and AMS1117-3.3. By type, the board carries 17 resistors, 15 capacitors, 9 connectors, 5 ICs, 4 transistors and 2 crystals.
From the project
MM00 is the base/controller board for the ModMIDI modular system. It connects to the USB host, communicates with attached modules over I²C and an alert line, and breaks out MCU signals for compatible shields such as MM01.
MM00 is the base/controller board for the ModMIDI modular system. It connects to the USB host, communicates with attached modules over I²C and an alert line, and breaks out MCU signals for compatible shields such as MM01.
Revision: 1.0, dated 2025-02-09 in the schematic title block.
- MCU: STM32F103C8, per the project specification. The schematic uses the STM32F103C8-BTx family symbol. - Clocking: Y1 is marked 16M 9p; Y2 is marked 32K 12.5p. The 16 MHz HSE is important when selecting/configuring the PlatformIO Arduino core; do not assume a Blue Pill's 8 MHz crystal. - USB: USB D+/D−…
Main components on the MM00
MM00 bill of materials (BOM)
55 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C_8-B_Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 2 | USBLC6-4SC6 | SOT-23-6 | U2, U4 |
| 1 | LM66100DCK | SOT-363_SC-70-6 | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U5 |
| 4 | MMBT2222A | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | 16M 9p | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32K 12.5p | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 01x04 | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J1 |
| 4 | 01x03 | PinHeader_1x03_P2.54mm_Horizontal | J2, J3, J5, J6 |
| 1 | 01x04 | PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | 01x05 | JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J7 |
| 2 | 01x13 | PinHeader_1x13_P2.54mm_Vertical | J8, J9 |
| 1 | 2.6V 20mA (W) | LED_0603_1608Metric | D1 |
| 1 | 1.9V 20mA (R) | LED_0603_1608Metric | D2 |
| 1 | 100R | L_0805_2012Metric | FB1 |
| 2 | 10u | C_1206_3216Metric | C1, C15 |
| 6 | 100n | C_0603_1608Metric | C2, C3, C4, C5, C6, C14 |
| 1 | 10n | C_0603_1608Metric | C7 |
| 2 | 10p | C_0603_1608Metric | C8, C10 |
| 2 | 1u | C_1206_3216Metric | C9, C11 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 15p | C_0603_1608Metric | C12, C13 |
| 4 | 10K | R_0603_1608Metric | R1, R2, R10, R16 |
| 1 | 1K5 | R_0603_1608Metric | R3 |
| 3 | 1K | R_0603_1608Metric | R4, R7, R9 |
| 2 | 0R | R_0603_1608Metric | R5, R8 |
| 4 | 4.7K | R_0603_1608Metric | R6, R13, R14, R15 |
| 1 | 150R | R_0603_1608Metric | R11 |
| 1 | 270R | R_0603_1608Metric | R12 |
| 1 | 100K | R_0603_1608Metric | R17 |
MM00 design files
The KiCad project lives in the adampisula/modmidi repository on GitHub; these links point at the commit this page was built from.
MM00: common questions
What microcontroller does the MM00 use?
The MM00 is built around the STM32F103C_8-B_Tx, from the STM32 family.
How big is the MM00 PCB?
The MM00 measures 58.4 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MM00?
55 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MM00 design files?
From the adampisula/modmidi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MM00 design in my own project?
Yes, under the terms of its MIT license, which adampisula chose for the repository.
Can I test firmware for the MM00 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in modmidi
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k