Sensor board voc temp
About the Sensor board voc temp
Sensor board voc temp is an open source STM32 PCB design by adamvirovecz, published on GitHub under the MIT license. It is a 2-layer board measuring 40 × 27 mm, with 30 components from 19 distinct parts.
Its main chip is the STM32G030J6M6, from the STM32 family. Other key parts include the TPS7A2033PDBVR, TXU0202DCUR, SGP41-D-R4 and SHT41-AD1F-R2. By type, the board carries 10 capacitors, 8 resistors, 5 ICs, 5 diodes, 1 connector and 1 fuse.
It belongs with the sensors designs in this gallery.
From the project
VOC, Humidity and Temperature Sensor Board
Main components on the Sensor board voc temp
Sensor board voc temp bill of materials (BOM)
30 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS7A2033PDBVR Texas Instruments | SOT-23-5 | U1 |
| 1 | TXU0202DCUR Texas Instruments | VSSOP-8_2.3x2mm_P0.5mm | U2 |
| 1 | SGP41-D-R4 Sensirion | DFN-6-1EP_2.44x2.44mm_P0.8mm_EP1.25x1.64mm | U3 |
| 1 | STM32G030J6M6 STM32G030J6Mx STMicroelectronics | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | SHT41-AD1F-R2 SHT4x Sensirion | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U5 |
| 1 | 213226-0410 Main_Connector Molex | Molex_CLIK_Mate_213226_0410_1x04_1MP_P1.50mm_Horizontal | J1 |
| 1 | nanoSMDC035F-2 0.35A PPTC Littelfuse | Fuse_LittelFuse_nanoSMDC_Series | F1 |
| 1 | SMAJ5.0A Littelfuse | D_SMA | D1 |
| 2 | ESD5Z5.0T5G onsemi | D_SOD-523 | D2, D3 |
| 1 | 150060VS75000 Wurth Elektronik | LED_0603_1608Metric | D4 |
| 1 | ESDALC6V1W5 STMicroelectronics | SOT-353_SC-70-5 | D5 |
| 1 | 0805YC106KAT2A 10 µF KYOCERA AVX | C_0805_2012Metric | C1 |
| 4 | C1608X7R1C105K080AC 1 µF TDK | C_0603_1608Metric | C2, C6, C7, C8 |
| 2 | GRM21BR71C475KE51K 4.7 µF Murata | C_0805_2012Metric | C3, C10 |
| 3 | 0603YC104KAT2A 100 nF KYOCERA AVX | C_0603_1608Metric | C4, C5, C9 |
| 4 | CRCW060310R0FKEAHP 10 Ω Vishay | R_0603_1608Metric | R1, R2, R3, R4 |
| 1 | CRCW06034R70FKEA 4.7 Ω Vishay | R_0603_1608Metric | R5 |
| 2 | CRCW060310K0FKECC 10k Vishay | R_0603_1608Metric | R6, R7 |
| 1 | CRCW0603680RFKEA 680 Ω Vishay | R_0603_1608Metric | R8 |
Sensor board voc temp design files
The KiCad project lives in the adamvirovecz/sensor-board-voc-temp repository on GitHub; these links point at the commit this page was built from.
Sensor board voc temp: common questions
What microcontroller does the Sensor board voc temp use?
The Sensor board voc temp is built around the STM32G030J6M6, from the STM32 family.
How big is the Sensor board voc temp?
The Sensor board voc temp measures 40 × 27 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor board voc temp?
30 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sensor board voc temp design files?
From the adamvirovecz/sensor-board-voc-temp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sensor board voc temp design in my own project?
Yes, under the terms of its MIT license, which adamvirovecz chose for the repository.
Can I test firmware for the Sensor board voc temp without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k
STM32Brain board STM32F407
61.8 × 73.2 mm69 parts2LGPL-3.01.2k