9 open source boards using the TXU0202DCUR
Real designs built with the TXU0202DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Moto gps rev a1
mx3353672833-debug
52 × 52 mm95 parts4LCustom license320Sisu SSE-9
briskspirit
43.9 × 118.2 mm259 parts6LUnlicense18RP2040/RP2350
Dut hub hw
Netlist-Studio
100 × 155 mm147 parts4LCERN-OHL-S-2.011RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1Microchip SAM
PomeloCore
robouden
40 × 100 mm156 parts4LNo license1STM32
Sensor board voc temp
adamvirovecz
40 × 27 mm30 parts2LMIT1PIC
Netdaq
Gherkin
80 × 105.5 mm616 parts4LCERN-OHL-P-2.00Pcb module ce card
Open-Air-Foundation
44 × 55.1 mm102 parts4LCC-BY-SA-4.00ESP32
Moto gps rev a1
tang003
52 × 52 mm95 parts4LCustom license0
How designs wire the TXU0202DCUR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TXU0202DCUR connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 4.7 µF).
- The VCCB pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 89% | — |
| VCCApin 3 | Connected to: 3.3V 78% · a signal 22% |
|
| VCCBpin 7 | Connected to: 3.3V 56% · a signal 44% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Moto gps rev a1 by mx3353672833-debug, Sisu SSE-9 by briskspirit, Dut hub hw by Netlist-Studio and Sensor board voc temp by adamvirovecz.
The TXU0202DCUR in open source designs
The gallery holds 9 open source boards using the TXU0202DCUR from 9 GitHub repositories; a typical one measures about 52 × 84 mm and carries around 147 components.
89% use four copper layers or more, and 56% carry an open source license.
The most starred is Moto gps rev a1 by mx3353672833-debug.
Parts used alongside the TXU0202DCUR
Microcontrollers on boards using the TXU0202DCUR
What boards using the TXU0202DCUR are built for
TXU0202DCUR: common questions
Where can I find a TXU0202DCUR reference design?
Each of the 9 boards on this page is a real design using the TXU0202DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXU0202DCUR VCCA pin?
The VCCA pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the TXU0202DCUR.
What decoupling capacitors do designs use on the TXU0202DCUR VCCB pin?
The VCCB pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the TXU0202DCUR.
What parts are used alongside the TXU0202DCUR?
The TPS7A2030PDBVR, TUSB320LAIRWBR, BQ25628ERYKR, ESP32-S3-WROOM-1U-N16R8 and IIS2MDCTR appear in the most repositories here.
Which microcontrollers do boards using the TXU0202DCUR use?
Most are built on ESP32 (2), RP2040/RP2350 (2), PIC (1) and Microchip SAM (1).
How big is a typical board using the TXU0202DCUR?
The median is 52 × 84 mm, and 11% are two-layer designs.
What is the most popular open source board using the TXU0202DCUR?
By GitHub stars, Moto gps rev a1 by mx3353672833-debug, with 320 stars.
Can I simulate one of these boards using the TXU0202DCUR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.