HardLabs

Pneumatic ctrl.1.1

adarwoo·KiCad·cnc/pneumatic_ctrl/pneumatic_ctrl.1.1.kicad_pcb

Pneumatic ctrl.1.1 PCB layout, top view — open source AVR/Arduino board by adarwoo

About the Pneumatic ctrl.1.1 PCB

Pneumatic ctrl.1.1 is an open source AVR/Arduino PCB design by adarwoo, published on GitHub. It is a 2-layer board measuring 46 × 86 mm, with 40 components from 14 distinct parts.

Its main chip is the ATTINY3224-SS, from the AVR/Arduino family. Other key parts include the MIC5205-5.0YM5. By type, the board carries 14 resistors, 9 connectors, 6 diodes, 5 transistors, 4 capacitors and 2 ICs.

From the project

All KiCad projects

Currently, PCBs for the cnc (see Youtube guillaume.arreckx channel) are publised.

Main components on the Pneumatic ctrl.1.1

ATTINY3224-SSMIC5205-5.0YM5

Pneumatic ctrl.1.1 bill of materials (BOM)

40 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY3224-SS
ATtiny3224-SS
U1
1
MIC5205-5.0YM5
U2
5
DMN6075S
Q2, Q3, Q4, Q5, Q6
7
CONN_01X03_PIN
Conn_01x03_Pin
J1, J2, J3, J4, J5, J6, J8
1
CONN_01X02_PIN
Conn_01x02_Pin
J7
1
AVR-UPDI-6
J10
5
4448
D
D1, D2, D3, D4, D5
1
LED
D6
3
1u
C1, C3, C4
1
470p
C2
6
10K
R1, R4, R6, R8, R11, R12
2
332
470
R2, R13
5
22
R3, R5, R7, R9, R10
1
470
R14

Pneumatic ctrl.1.1 design files

The KiCad project lives in the adarwoo/KiCad repository on GitHub; these links point at the commit this page was built from.

Pneumatic ctrl.1.1: common questions

What microcontroller does the Pneumatic ctrl.1.1 use?

The Pneumatic ctrl.1.1 is built around the ATTINY3224-SS, from the AVR/Arduino family.

How big is the Pneumatic ctrl.1.1 PCB?

The Pneumatic ctrl.1.1 measures 46 × 86 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pneumatic ctrl.1.1?

40 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pneumatic ctrl.1.1 design files?

From the adarwoo/KiCad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Pneumatic ctrl.1.1 design in my own project?

The repository has no license, so all rights stay with adarwoo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pneumatic ctrl.1.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KiCad

Similar boards