5 open source boards using the ATtiny3224-SS
Real designs built with the ATtiny3224-SS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Autopilot
ieb
64 × 78 mm33 parts2LNo license0AVR/Arduino
ZB3245TSS OPENPNP
hschack
62.5 × 48.5 mm25 parts2LNo license0AVR/Arduino
Attiny soic-14-barebone breakout board
jaco-pixeldump
21.1 × 19.6 mm3 parts2LMIT0AVR/Arduino
Pneumatic ctrl
adarwoo
60 × 86 mm58 parts2LNo license0AVR/Arduino
Pneumatic ctrl.1.1
adarwoo
46 × 86 mm40 parts2LNo license0
The ATtiny3224-SS in open source designs
The gallery holds 5 open source boards using the ATtiny3224-SS from 4 GitHub repositories; a typical one measures about 60 × 78 mm and carries around 33 components.
100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Pneumatic ctrl by adarwoo.
Microcontrollers on boards using the ATtiny3224-SS
What boards using the ATtiny3224-SS are built for
ATtiny3224-SS: common questions
Where can I find a ATtiny3224-SS reference design?
Each of the 5 boards on this page is a real design using the ATtiny3224-SS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATtiny3224-SS use?
Most are built on AVR/Arduino (5).
How big is a typical board using the ATtiny3224-SS?
The median is 60 × 78 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATtiny3224-SS?
By GitHub stars, Pneumatic ctrl by adarwoo, with 0 stars.
Can I simulate one of these boards using the ATtiny3224-SS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.