Analog to pwm
About the Analog to pwm PCB
Analog to pwm is an open source PCB design by adeboni, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 10 × 104 mm, with 51 components from 15 distinct parts.
Other key parts include the C6187, C7955 and C7593. By type, the board carries 15 resistors, 13 capacitors, 7 connectors, 7 diodes, 6 ICs and 3 transistors.
From the project
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections
Main components on the Analog to pwm
Analog to pwm bill of materials (BOM)
51 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C6187 LM1117-5.0 | SOT-223-3_TabPin2 | U1 |
| 2 | C7955 LM393 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 3 | C7593 NE555D | SOIC-8_3.9x4.9mm_P1.27mm | U4, U5, U7 |
| 3 | C2149 MMBT3906 | SOT-23 | Q1, Q2, Q4 |
| 1 | . | Pins_2x05_2.54mm_TH_Europower | J1 |
| 6 | JACK | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2, J3, J4, J5, J8, J9 |
| 1 | C64898 SM4007 | D_SOD-123 | D1 |
| 6 | C81598 1N4148W | D_SOD-123 | D2, D3, D4, D5, D8, D9 |
| 2 | C96446 10u | C_0603_1608Metric | C1, C2 |
| 8 | C14663 100n | C_0603_1608Metric | C3, C4, C5, C6, C8, C10, C12, C16 |
| 3 | C1595 1.5n | C_0603_1608Metric | C9, C11, C15 |
| 6 | C21190 1k | R_0603_1608Metric | R1, R2, R3, R5, R14, R17 |
| 3 | C4190 2.2k | R_0603_1608Metric | R4, R8, R18 |
| 3 | C25804 10k | R_0603_1608Metric | R6, R9, R19 |
| 3 | C23196 51k | R_0603_1608Metric | R7, R11, R20 |
Analog to pwm design files
The KiCad project lives in the adeboni/laser-projector repository on GitHub; these links point at the commit this page was built from.
Analog to pwm: common questions
How big is the Analog to pwm PCB?
The Analog to pwm measures 10 × 104 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Analog to pwm?
51 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Analog to pwm design files?
From the adeboni/laser-projector repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Analog to pwm design in my own project?
Yes, under the terms of its GPL-3.0 license, which adeboni chose for the repository.
More boards in laser-projector
RP2040/RP2350Combo laser driver
100 × 100 mm165 parts2LGPL-3.00
NXP4x laser controller
70.8 × 100 mm138 parts4LGPL-3.00
Mega laser driver
100 × 100 mm93 parts2LGPL-3.00
RP2040/RP2350Canbus adapter
100 × 80 mm77 parts2LGPL-3.00
Raspberry PiCanbus controller
100 × 100 mm74 parts2LGPL-3.00
Mini laser driver
63 × 42 mm48 parts2LGPL-3.00
15v power
77.8 × 49.6 mm11 parts2LGPL-3.00
Db25 adapter
114.2 × 67.4 mm5 parts2LGPL-3.00