Codepo 2ème plaque
About the Codepo 2ème plaque PCB
Codepo 2ème plaque is an open source ESP32 PCB design by AdelStudent, published on GitHub. It is a 2-layer board measuring 130.2 × 94 mm, with 46 components from 18 distinct parts.
Its main chip is the OPA182IDBVR, from the ESP32 family. Other key parts include the TMUX4051PWR. By type, the board carries 18 diodes, 11 resistors, 10 connectors, 3 ICs and 2 capacitors.
Main components on the Codepo 2ème plaque
Codepo 2ème plaque bill of materials (BOM)
46 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | OPA182IDBVR | SOT95P280X145-5N | IC1, IC3 |
| 1 | TMUX4051PWR | SOP65P640X120-16N | IC2 |
| 5 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J1, J3, J4, J6, J9 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J7, J8 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | DUE | MODULE_A000062 | Arduino1 |
| 1 | Thermistor_NTC | B57364S0300M000 | TH1 |
| 10 | D_Schottky | SODFL2513X70N | D1, D2, D11, D12, D13, D14, D15, D16 +2 |
| 8 | D_Zener | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4, D5, D6, D7, D8, D9, D10 |
| 1 | 100 uF | CP_Elec_3x5.3 | C1 |
| 1 | 0.1uF | CP_Elec_3x5.3 | C2 |
| 4 | 910Kohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R10, R11 |
| 1 | 270kohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 450kohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 910 kohms | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 300kohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 3 | 10kohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9 |
Codepo 2ème plaque design files
The KiCad project lives in the AdelStudent/Codepo_22_23 repository on GitHub; these links point at the commit this page was built from.
Codepo 2ème plaque: common questions
What microcontroller does the Codepo 2ème plaque use?
The Codepo 2ème plaque is built around the OPA182IDBVR, from the ESP32 family.
How big is the Codepo 2ème plaque PCB?
The Codepo 2ème plaque measures 130.2 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Codepo 2ème plaque?
46 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Codepo 2ème plaque design files?
From the AdelStudent/Codepo_22_23 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Codepo 2ème plaque design in my own project?
The repository has no license, so all rights stay with AdelStudent. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Codepo 2ème plaque without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Codepo_22_23
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k