Badge
atopile·atopile·examples/led_badge/layouts/badge/badge.kicad_pcb
About the Badge PCB
Badge is an open source ESP32 PCB design by atopile, published on GitHub under the MIT license. It is a 4-layer board measuring 56.3 × 39 mm, with 239 components from 23 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the 532610271, ICS-43434, BQ25185DLHR and TPS63020DSJR. By type, the board carries 115 capacitors, 100 LEDs, 14 resistors, 5 ICs, 2 switches and 1 inductor.
It belongs with the wearables, displays & leds and power & battery designs in this gallery.
From the project
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
Write hardware like software. atopile is a language, compiler, and toolchain for electronics—declarative .ato files, deep validation, and layout that works natively with KiCad.
- Reusable modules instead of starting from scratch every time - Capture intent with equations directly in your design - Automatic parametric picking of discrete components
The easiest way is via the editor extension—it installs and manages ato for you:

Main components on the Badge
Badge bill of materials (BOM)
239 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 532610271 C130026 MOLEX | CONN-SMD_532610271 | U2 |
| 1 | ICS-43434 TDK InvenSense | MIC-SMD_6P-L3.5-W2.7-P0.90-BL | U3 |
| 1 | ESP32-C3-MINI-1-N4 Espressif Systems | WIFIM-SMD_ESP32-C3-MINI-1 | U4 |
| 1 | BQ25185DLHR BQ25185DLHR | WSON-10_L2.2-W2.0-P0.40-BL-EP_TI_DLH0010A | U5 |
| 1 | TPS63020DSJR Texas Instruments | VSON-14_L4.0-W3.0-P0.50-BL-EP_TI_DSJ | U6 |
| 1 | — | EEMB_BATTERY_LP402535 | B1 |
| 2 | SKRPACE010 ALPSALPINE | KEY-SMD_4P-L4.2-W3.2-P2.20-LS4.6 | SW1, SW2 |
| 1 | KH-TYPE-C-16P kinghelm | USB-C-SMD_KH-TYPE-C-16P | USB1 |
| 100 | SK6805-EC20 OPSCO | LED-SMD_4P-L2.0-W2.0-BR | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +92 |
| 1 | WPN252012H1R5MT Sunlord | IND-SMD_L2.5-W2.0_WPN252012H | L1 |
| 2 | CL21A106KAYNNNE 10µF ±10% 25V X5R Samsung Electro-Mechanics | C0805 | C1, C2 |
| 4 | CL21A226MQQNNNE 22µF ±20% 6.3V X5R Samsung Electro-Mechanics | C0805 | C3, C4, C110, C111 |
| 105 | CL05B104KO5NNNC 100nF ±10% 16V X7R Samsung Electro-Mechanics | C0402 | C5, C6, C7, C8, C9, C10, C11, C12 +97 |
| 1 | CL10A226MQ8NRNC 22µF ±20% 6.3V X5R Samsung Electro-Mechanics | C0603 | C108 |
| 2 | CL05A105KA5NQNC 1µF ±10% 25V X5R Samsung Electro-Mechanics | C0402 | C113, C114 |
| 1 | GRM155R60J106ME44D 10µF ±20% 6.3V X5R Murata Electronics | C0402 | C115 |
| 1 | 0402WGF2003TCE 200kΩ ±1% 62.5mW UNI-ROYAL(Uniroyal Elec) | R0402 | R1 |
| 2 | 0402WGF1004TCE 1MΩ ±1% 62.5mW UNI-ROYAL(Uniroyal Elec) | R0402 | R2, R3 |
| 1 | 0402WGF2001TCE 2kΩ ±1% 62.5mW UNI-ROYAL(Uniroyal Elec) | R0402 | R4 |
| 1 | 0402WGF1003TCE 100kΩ ±1% 62.5mW UNI-ROYAL(Uniroyal Elec) | R0402 | R5 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 0402WGF1002TCE 10kΩ ±1% 62.5mW UNI-ROYAL(Uniroyal Elec) | R0402 | R6, R7, R8, R11, R13, R15 |
| 2 | 0402WGF4701TCE 4.7kΩ ±1% 62.5mW UNI-ROYAL(Uniroyal Elec) | R0402 | R9, R10 |
| 1 | RC0402FR-0718KL 18kΩ ±1% 62.5mW YAGEO | R0402 | R12 |
Badge design files
The KiCad project lives in the atopile/atopile repository on GitHub; these links point at the commit this page was built from.
Badge: common questions
What microcontroller does the Badge use?
The Badge is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the Badge PCB?
The Badge measures 56.3 × 39 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Badge?
239 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Badge design files?
From the atopile/atopile repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Badge design in my own project?
Yes, under the terms of its MIT license, which atopile chose for the repository.
Can I test firmware for the Badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in atopile
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
EinkPDA keyboard
TalismanDesign
95 × 55.5 mm128 parts4LApache-2.02.0kESP32
Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k