Esp32 minimal

atopile·atopile·examples/esp32_minimal/layouts/esp32_minimal/esp32_minimal.kicad_pcb

Esp32 minimal PCB layout, top view — open source ESP32 board by atopile

About the Esp32 minimal PCB

Esp32 minimal is an open source ESP32 PCB design by atopile, published on GitHub under the MIT license. It is a 2-layer board measuring 36.2 × 26.8 mm, with 20 components from 13 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the TLV75901PDRVR. By type, the board carries 7 resistors, 6 capacitors, 2 ICs, 2 switches, 1 fuse and 1 diode.

It belongs with the displays & leds designs in this gallery.

From the project

Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

Write hardware like software. atopile is a language, compiler, and toolchain for electronics—declarative .ato files, deep validation, and layout that works natively with KiCad.

- Reusable modules instead of starting from scratch every time - Capture intent with equations directly in your design - Automatic parametric picking of discrete components

The easiest way is via the editor extension—it installs and manages ato for you:

Esp32 minimal, from the project README
From the project README

Main components on the Esp32 minimal

Esp32 minimal bill of materials (BOM)

20 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8R8
C130026
Espressif Systems
U2
1
TLV75901PDRVR
Texas Instruments
U3
1
BSMD0805-050-15V
BHFUSE
F1
2
SKRPACE010
ALPSALPINE
SW1, SW2
1
TYPE-C 16PIN 2MD(073)
SHOU HAN
USB1
1
USBLC6-2SC6
STMicroelectronics
D1
3
CL05A105KA5NQNC
1µF ±10% 25V X5R
Samsung Electro-Mechanics
C1, C2, C10
2
CL05B104KO5NNNC
100nF ±10% 16V X7R
Samsung Electro-Mechanics
C3, C8
1
CL21A226MQQNNNE
22µF ±20% 6.3V X5R
Samsung Electro-Mechanics
C9
2
0402WGF1002TCE
10kΩ ±1% 62.5mW
UNI-ROYAL(Uniroyal Elec)
R1, R3
2
0402WGF1000TCE
100Ω ±1% 62.5mW
UNI-ROYAL(Uniroyal Elec)
R2, R4
1
0402WGF4702TCE
47kΩ ±1% 62.5mW
UNI-ROYAL(Uniroyal Elec)
R5
2
0402WGF5101TCE
5.1kΩ ±1% 62.5mW
UNI-ROYAL(Uniroyal Elec)
R6, R7

Esp32 minimal design files

The KiCad project lives in the atopile/atopile repository on GitHub; these links point at the commit this page was built from.

Esp32 minimal: common questions

What microcontroller does the Esp32 minimal use?

The Esp32 minimal is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.

How big is the Esp32 minimal PCB?

The Esp32 minimal measures 36.2 × 26.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32 minimal?

20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32 minimal design files?

From the atopile/atopile repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Esp32 minimal design in my own project?

Yes, under the terms of its MIT license, which atopile chose for the repository.

Can I test firmware for the Esp32 minimal without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in atopile

Similar boards