HardLabs

ZoM-Model-A

ademenev·open_spectre·fpga/hw/legacy/kicad_zynq_template/ZoM-Model-A.kicad_pcb

ZoM-Model-A PCB layout, top view — open source AVR/Arduino board by ademenev

About the ZoM-Model-A PCB

ZoM-Model-A is an open source AVR/Arduino PCB design by ademenev, published on GitHub. It is a 6-layer board measuring 75 × 40 mm, with 145 components from 46 distinct parts.

Its main chip is the Atmel AVR ATtiny10, from the AVR/Arduino family. Other key parts include the SiT8008AI-73-XXS-33.333333E, XA7Z020-1CLG400I, W25Q256FVBIG, TiWi-uB2 and ATSHA204A-STUCZ-T. By type, the board carries 65 capacitors, 42 resistors, 9 ICs, 7 connectors, 5 test points and 4 inductors.

It belongs with the audio designs in this gallery.

From the project

An open-source FPGA-based EMS SPECTRE video synth

using this dev board: https://www.aliexpress.com/item/1005005961199362.html?spm=a2g0o.orderlist.orderlistmain.76.1cc71802oC4QSS https://github.com/ChinaQMTECH/QMTECHXC7A15T35TCSG325COREBOARD

use these libs https://github.com/jmwilson/Adafruit-GFX-LibraryMicroBlaze https://github.com/jmwilson/AdafruitSSD1306_MicroBlaze

Main components on the ZoM-Model-A

Atmel AVR ATtiny10SiT8008AI-73-XXS-33.333333EXA7Z020-1CLG400IW25Q256FVBIGTiWi-uB2ATSHA204A-STUCZ-TEN5311QI

ZoM-Model-A bill of materials (BOM)

145 components, 46 distinct parts.

QtyPartRefs
1
Atmel AVR ATtiny10
IC1
1
SiT8008AI-73-XXS-33.333333E
U1
1
XA7Z020-1CLG400I
U2
2
W25Q256FVBIG
U3, U4
1
TiWi-uB2
U5
1
ATSHA204A-STUCZ-T
U6
2
EN5311QI
U7, U8
1
WANNE2,54-50 GERADE
J1
1
MMC SD Socket
J2
1
U.FL-R-SMT-1
J3
1
SCHD3A0100
J4
1
STIFTLEISTE2.54 OG 2R-8
J5
1
Stiftleiste versetzt 1-reihig, 6pol.
J7
1
PMod 2x6 Socket 90°
J8
1
Antena 2450AT43B100
ANT1
2
Mount.Hole 3.2mm
H1, H4
6
FIDU-DOT - small
PM1, PM2, PM3, PM4, PM5, PM6
1
CHS-04TA
S3
1
4pin button
SW1
5
TP
TP1, TP2, TP3, TP4, TP5
Show 26 more
QtyPartRefs
1
LED Red SML-P11UTT86
D1
1
LED Green SML-P11MTT86
D3
1
BKP0603HS121-T
L1
2
IND-Ferrite
L2, L3
1
BKP0603HS121-T
L4
17
470nF
C1, C8, C23, C34, C35, C36, C37, C41 +9
8
4.7µF
C2, C5, C10, C11, C17, C24, C26, C63
19
470nF
C3, C4, C6, C7, C12, C13, C14, C15 +11
9
47µF
C9, C16, C21, C25, C27, C28, C29, C30 +1
7
4.7µF
C49, C51, C52, C53, C54, C55, C56
2
4.7µF
C57, C58
3
100µF
C59, C60, C61
3
33R
R1, R4, R8
3
10K
R2, R9, R10
4
470R
R3, R7, R24, R31
17
10K
R5, R6, R11, R12, R13, R16, R17, R18 +9
2
0
R14, R15
2
4K7
R23, R37
1
470R
R25
2
33R
R26, R27
1
200K
R32
1
301K
R33
3
33R
R34, R35, R42
1
680R
R36
1
4K7
R38
1
0R
R41

ZoM-Model-A design files

The KiCad project lives in the ademenev/open_spectre repository on GitHub; these links point at the commit this page was built from.

ZoM-Model-A: common questions

What microcontroller does the ZoM-Model-A use?

The ZoM-Model-A is built around the Atmel AVR ATtiny10, from the AVR/Arduino family.

How big is the ZoM-Model-A PCB?

The ZoM-Model-A measures 75 × 40 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the ZoM-Model-A?

145 components, from 46 distinct parts. The full bill of materials is listed on this page.

Where can I download the ZoM-Model-A design files?

From the ademenev/open_spectre repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ZoM-Model-A design in my own project?

The repository has no license, so all rights stay with ademenev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ZoM-Model-A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in open_spectre

Similar boards