HardLabs

Artix hw proto

ademenev·open_spectre·fpga/hw/QM_tech_proto/Artix_hw_proto.kicad_pcb

Artix hw proto PCB layout, top view — open source RP2040/RP2350 board by ademenev

About the Artix hw proto PCB

Artix hw proto is an open source RP2040/RP2350 PCB design by ademenev, published on GitHub. It is a 2-layer board measuring 169.5 × 127 mm, with 97 components from 28 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the 74HC595. By type, the board carries 33 diodes, 25 switches, 14 resistors, 13 connectors, 4 test points and 2 ICs.

It belongs with the audio designs in this gallery.

From the project

An open-source FPGA-based EMS SPECTRE video synth

using this dev board: https://www.aliexpress.com/item/1005005961199362.html?spm=a2g0o.orderlist.orderlistmain.76.1cc71802oC4QSS https://github.com/ChinaQMTECH/QMTECHXC7A15T35TCSG325COREBOARD

use these libs https://github.com/jmwilson/Adafruit-GFX-LibraryMicroBlaze https://github.com/jmwilson/AdafruitSSD1306_MicroBlaze

Main components on the Artix hw proto

74HC595Pico

Artix hw proto bill of materials (BOM)

97 components, 28 distinct parts.

QtyPartRefs
1
74HC595
U1
1
Pico
U2
1
ASE-xxxMHz
X1
2
Conn_02x25_Odd_Even
J1, J2
1
oled_0_pmod
J3
2
JTAG
J4, J6
1
oled_1_pmod
J5
1
i2s_pmod
J7
1
dvi_pmod
J8
1
RST pogo
J9
1
RAM SCK
J10
1
RAM SI
J11
1
RAM SO
J12
1
Micro_SD_Card
J13
3
R_Potentiometer_US
RV1, RV2, RV3
5
RotaryEncoder_Switch
SW1, SW6, SW15, SW20, SW25
20
SW_Push_45deg
SW2, SW3, SW4, SW5, SW7, SW8, SW9, SW10 +12
1
5v
TP1
1
3v3
TP2
1
gnd
TP3
Show 8 more
QtyPartRefs
1
pmod_3v3
TP4
25
D
D1, D2, D3, D4, D5, D6, D7, D8 +17
8
LED
D26, D27, D28, D29, D30, D31, D32, D33
2
0.01UF
C1, C2
4
0
R1, R10, R11, R13
8
220
R2, R3, R4, R5, R6, R7, R8, R9
1
NP
R12
1
10k
R14

Artix hw proto design files

The KiCad project lives in the ademenev/open_spectre repository on GitHub; these links point at the commit this page was built from.

Artix hw proto: common questions

What microcontroller does the Artix hw proto use?

The Artix hw proto is built around the Pico, from the RP2040/RP2350 family.

How big is the Artix hw proto PCB?

The Artix hw proto measures 169.5 × 127 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Artix hw proto?

97 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Artix hw proto design files?

From the ademenev/open_spectre repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Artix hw proto design in my own project?

The repository has no license, so all rights stay with ademenev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Artix hw proto without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in open_spectre

Similar boards