Single-Lead-ECG-Shield
ADITHYANWUU2·Single-Lead-ECG-Shield
About the Single-Lead-ECG-Shield
Single-Lead-ECG-Shield is an open source PCB design by ADITHYANWUU2, published on GitHub under the MIT license. It is a 2-layer board measuring 68.6 × 53.4 mm, with 14 components from 11 distinct parts.
Other key parts include the AD8232ACPZ-R7 and AP2112K-3.3TRG1. By type, the board carries 5 resistors, 3 diodes, 2 ICs, 2 connectors and 2 capacitors.
It belongs with the dev boards & breakouts and wearables designs in this gallery.
From the project
Hardware design for an Arduino-compatible Single-Lead ECG (Electrocardiogram) Shield featuring the AD8232 heart-rate monitor analog front-end, multi-stage bandpass filtering, Right Leg Drive (RLD), leads-off detection, and electrical safety isolation.
An open-source, high-precision Single-Lead Electrocardiogram (ECG) Shield engineered to safely acquire, amplify, and filter microvolt-level biopotential cardiac signals directly from standard skin electrode patches.
Designed around the Analog Devices AD8232 heart rate monitor analog front-end (AFE), this shield incorporates active multi-stage bandpass filtering (0.5 Hz – 40 Hz), an active Right Leg Drive (RLD) common-mode hum cancellation circuit, DC leads-off detection, and a physical patient safety isolation barrier complying with IEC 60601-1 Type BF auxiliary current limits.
Main components on the Single-Lead-ECG-Shield
Single-Lead-ECG-Shield bill of materials (BOM)
14 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD8232ACPZ-R7 AD8232 Analog Devices | QFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U1 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 Diodes Inc. | SOT-23-5 | U2 |
| 1 | SJ-3523-SMT PJ-320A CUI Devices | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J1 |
| 1 | 22-28-4030 ELECTRODES Molex | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | LTST-C170KGKT PWR_GRN Lite-On | LED_0805_2012Metric | D1 |
| 1 | LTST-C170KSKT LOD_YEL Lite-On | LED_0805_2012Metric | D2 |
| 1 | LTST-C170KRKT BEAT_RED Lite-On | LED_0805_2012Metric | D3 |
| 1 | GRM216R71E683KA01D 68nF Murata | C_0805_2012Metric | C7 |
| 1 | GRM216R71E333KA01D 33nF Murata | C_0805_2012Metric | C8 |
| 3 | RC0805FR-07180KL 180k Yageo | R_0805_2012Metric | R1, R2, R3 |
| 2 | RC0805FR-07100KL 100k Yageo | R_0805_2012Metric | R6, R7 |
Single-Lead-ECG-Shield design files
The KiCad project lives in the ADITHYANWUU2/Single-Lead-ECG-Shield repository on GitHub; these links point at the commit this page was built from.
- LayoutSingle-Lead-ECG-Shield.kicad_pcb
- SchematicSingle-Lead-ECG-Shield.kicad_sch
- BOMBOM.csv
Single-Lead-ECG-Shield: common questions
How big is the Single-Lead-ECG-Shield?
The Single-Lead-ECG-Shield measures 68.6 × 53.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Single-Lead-ECG-Shield?
14 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Single-Lead-ECG-Shield design files?
From the ADITHYANWUU2/Single-Lead-ECG-Shield repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Single-Lead-ECG-Shield design in my own project?
Yes, under the terms of its MIT license, which ADITHYANWUU2 chose for the repository.
Similar boards
View screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k