HardLabs

RequiemXT

Adityachavhan339·RequiemXT·PCB Design Files/RequiemXTX.kicad_pcb

RequiemXT PCB layout, top view — open source RP2040/RP2350 board by Adityachavhan339

About the RequiemXT PCB

RequiemXT is an open source RP2040/RP2350 PCB design by Adityachavhan339, published on GitHub. It is a 2-layer board measuring 69.3 × 62.8 mm, with 17 components from 17 distinct parts.

Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. By type, the board carries 14 switches and 2 connectors.

From the project

RequiemXT is Custom wired USB game controller with dual Hall-effect joysticks, 14 buttons.

- Waveshare RP2040-Zero Raspberry Pi MCU With Pre Soldered Header - USB-C wired connection - Electronic Spices 6 X 6 X 5mm Blue Color Touch Transient Horn Type Push Button Switch Pack of 20pcs - Jumper Wire Female From Female (40 pcs) - Robocraze PS2 Joystick Module Dual Axis Analog Sensor Push Button Switch - Custom 2-Layer Controller Carrier Board - #All Parts Link With Prices Is Available In BOM.csv and md.#

RequiemXT, from the project README
From the project README

RequiemXT bill of materials (BOM)

17 components, 17 distinct parts.

QtyPartRefs
1
LEFT_JOYSTICK
J1
1
RIGHT_JOYSTICK
J2
1
RP2040-Zero
RZ1
1
BUTTON_A
SW1
1
BUTTON_B
SW2
1
BUTTON_X
SW3
1
BUTTON_Y
SW4
1
DPAD_UP
SW5
1
DPAD_DOWN
SW6
1
DAPD_LEFT
SW7
1
DAPD_RIGHT
SW8
1
START
SW9
1
SELECT
SW10
1
BUTTON_LB
SW11
1
BUTTON_RB
SW12
1
BUTTON_LT
SW13
1
BUTTON_RT
SW14

RequiemXT design files

The KiCad project lives in the Adityachavhan339/RequiemXT repository on GitHub; these links point at the commit this page was built from.

RequiemXT: common questions

What microcontroller does the RequiemXT use?

The RequiemXT is built around the RP2040-Zero, from the RP2040/RP2350 family.

How big is the RequiemXT PCB?

The RequiemXT measures 69.3 × 62.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RequiemXT?

17 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the RequiemXT design files?

From the Adityachavhan339/RequiemXT repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RequiemXT design in my own project?

The repository has no license, so all rights stay with Adityachavhan339. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RequiemXT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards