Receiver
About the Receiver PCB
Receiver is an open source PCB design by AdmondDeng, published on GitHub. It is a 2-layer board measuring 96 × 58 mm, with 19 components from 19 distinct parts.
Other key parts include the MINI560, BP, voltage converter 1, nRF24L01+ and voltage convert 2. By type, the board carries 8 connectors, 5 ICs, 3 resistors, 1 battery holder, 1 buzzer and 1 switch.
From the project
remote controller using blue pill + nrf24l01
Main components on the Receiver
Receiver bill of materials (BOM)
19 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MINI560 | mini560 | U1 |
| 1 | BP | blue_pill | U4 |
| 1 | voltage converter 1 | 3v_5v_converter | U5 |
| 1 | nRF24L01+ | PinHeader_2x04_P2.54mm_Vertical | U6 |
| 1 | voltage convert 2 | 3v_5v_converter | U7 |
| 1 | CH1 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | CH2 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | CH3 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | CH4 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | CH5 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | CH6 | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | CH7 | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | CH8 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | 3S Battery | R_2816_7142Metric_Pad3.20x4.45mm_HandSolder | BT1 |
| 1 | Buzzer | buzzer | BZ1 |
| 1 | power switch | R_2816_7142Metric_Pad3.20x4.45mm_HandSolder | SW1 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 40K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Receiver design files
The KiCad project lives in the AdmondDeng/remote repository on GitHub; these links point at the commit this page was built from.
Receiver: common questions
How big is the Receiver PCB?
The Receiver measures 96 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Receiver?
19 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Receiver design files?
From the AdmondDeng/remote repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Receiver design in my own project?
The repository has no license, so all rights stay with AdmondDeng. Use it as a reference, and ask the author before reusing the design.
