8 open source boards using the Mini560
Real designs built with the Mini560, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
WizServoTester
Abean2k
100 × 60.5 mm31 parts2LMIT5ESP32
TrailCurrentPicket
trailcurrentoss
150.8 × 71.4 mm17 parts2LMIT1ESP32
TrailCurrentPlateau
trailcurrentoss
68.1 × 57.9 mm16 parts2LMIT1ESP32
ESPiezometer
adbj-hw
69.7 × 57.1 mm11 parts2LCC-BY-4.01ESP32
K-Line
rickwargo
75.6 × 64.1 mm61 parts2LNo license0Rotary compression tester
bilka00
69.9 × 35.6 mm23 parts2LGPL-3.00Receiver
AdmondDeng
96 × 58 mm19 parts2LNo license0ESP32
MiAM SupervisorBoard
14chanwa
104.4 × 63.5 mm29 parts2LNo license0
How designs wire the Mini560
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the Mini560 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 4 | Connected to: GND 72% · 12V 17% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include WizServoTester by Abean2k, ESPiezometer by adbj-hw, TrailCurrentPicket by trailcurrentoss and TrailCurrentPlateau by trailcurrentoss.
The Mini560 in open source designs
The gallery holds 8 open source boards using the Mini560 from 8 GitHub repositories; a typical one measures about 85.8 × 59.3 mm and carries around 21 components.
100% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is WizServoTester by Abean2k.
Parts used alongside the Mini560
Microcontrollers on boards using the Mini560
What boards using the Mini560 are built for
Mini560: common questions
Where can I find a Mini560 reference design?
Each of the 8 boards on this page is a real design using the Mini560. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Mini560 use?
Most are built on ESP32 (6).
How big is a typical board using the Mini560?
The median is 85.8 × 59.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the Mini560?
By GitHub stars, WizServoTester by Abean2k, with 5 stars.
Can I simulate one of these boards using the Mini560 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.