GPS-Puck
AerodyneLabs·GPS-Puck·Hardware/GPS-Puck.kicad_pcb
About the GPS-Puck PCB
GPS-Puck is an open source PCB design by AerodyneLabs, published on GitHub. It is a 2-layer board measuring 44 × 44 mm, with 43 components from 28 distinct parts.
Other key parts include the Venus838LPx-L, SKY65047-360LF, NCP1521 and 74HC2G86. By type, the board carries 13 capacitors, 13 resistors, 4 ICs, 3 inductors, 2 transistors and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
Venus based GPS serial GPS puck
Main components on the GPS-Puck
GPS-Puck bill of materials (BOM)
43 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Venus838LPx-L | Sensor_Venus838 | U1 |
| 1 | SKY65047-360LF | SON50P200X200-9T100X180N | U2 |
| 1 | NCP1521 | SOT95P275-5L40N | U3 |
| 1 | 74HC2G86 | SOP65P400-8N | U4 |
| 2 | BSS138 | SOT95P240-3N-GSD | Q1, Q2 |
| 1 | Conn-9 | Conn_9-Wire-Pads | J1 |
| 1 | Antenna | Antenna_APAE1575R1840BADB1F | AE1 |
| 1 | 3V | Battery_ML-1220-F1AN | B1 |
| 1 | Board | Board_Hammond-1551RFL | Board_Hammond-1551RFL |
| 3 | INV | SB1608N | SB1, SB2, SB3 |
| 1 | RB521 | SODFL1608N | D1 |
| 1 | 8.2nH | INDC1608N | L1 |
| 1 | 2.2nH | INDC1608N | L2 |
| 1 | 2.2uH | INDC2012N | L3 |
| 6 | 1uF | CAPC1608N | C1, C2, C6, C7, C10, C13 |
| 1 | 0.01uF | CAPC1608N | C3 |
| 1 | 3.6pF | CAPC1608N | C4 |
| 1 | 22pF | CAPC1608N | C5 |
| 1 | 22nF | CAPC1608N | C8 |
| 1 | 4.7uF | CAPC1608N | C9 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 18pF | CAPC1608N | C11 |
| 1 | 10uF | CAPC2012N | C12 |
| 8 | 33k | RESC1608N | R1, R8, R9, R10, R11, R12, R13, R14 |
| 1 | 180 | RESC1608N | R2 |
| 1 | 4.7k | RESC1608N | R3 |
| 1 | 390 | RESC1608N | R4 |
| 1 | 453k | RESC1608N | R5 |
| 1 | 100k | RESC1608N | R6 |
GPS-Puck design files
The KiCad project lives in the AerodyneLabs/GPS-Puck repository on GitHub; these links point at the commit this page was built from.
GPS-Puck: common questions
How big is the GPS-Puck PCB?
The GPS-Puck measures 44 × 44 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GPS-Puck?
43 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the GPS-Puck design files?
From the AerodyneLabs/GPS-Puck repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the GPS-Puck design in my own project?
The repository has no license, so all rights stay with AerodyneLabs. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568