PCB-Design
ahabiqbal08·PCB-Design
About the PCB-Design
PCB-Design is an open source PCB design by ahabiqbal08, published on GitHub. It is a 2-layer board measuring 85.9 × 59.5 mm, with 28 components from 9 distinct parts.
Other key parts include the LM741. By type, the board carries 12 resistors, 5 capacitors, 4 ICs and 3 connectors.
It belongs with the test & measurement designs in this gallery.
From the project
KiCad PCB design for a Signal Generator
A two-layer through-hole PCB that generates a square wave, converts it to a triangle wave, and then to an approximately sine wave, using four LM741 op-amps. Designed in KiCad 10.
The circuit is a chain of four op-amp stages. Each stage feeds the next.
Each op-amp has a trimmer (RV1–RV4) across its offset-null pins (1 and 5), with the wiper tied to −15 V. This is the standard LM741 offset adjustment.
Main components on the PCB-Design
PCB-Design bill of materials (BOM)
28 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | LM741 | DIP-8_W7.62mm | U1, U2, U3, U4 |
| 3 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Right | J1, J2, J3 |
| 4 | R_Potentiometer | Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3, RV4 |
| 2 | 0.01u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C3 |
| 1 | 0.1u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 2 | 100n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C4, C5 |
| 4 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R5, R9 |
| 2 | 27k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R12 |
| 6 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6, R7, R8, R10, R11 |
PCB-Design design files
The KiCad project lives in the ahabiqbal08/PCB-Design repository on GitHub; these links point at the commit this page was built from.
- Layoutelec2133_bonus.kicad_pcb
- Schematicelec2133_bonus.kicad_sch
PCB-Design: common questions
How big is the PCB-Design?
The PCB-Design measures 85.9 × 59.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB-Design?
28 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB-Design design files?
From the ahabiqbal08/PCB-Design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB-Design design in my own project?
The repository has no license, so all rights stay with ahabiqbal08. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528