Setup
ahmet140·flight-controller·flight controller/kicad/setup/setup.kicad_pcb
About the Setup PCB
Setup is an open source PCB design by ahmet140, published on GitHub. It is a 2-layer board measuring 61 × 22.9 mm, with 9 components from 3 distinct parts.
By type, the board carries 4 diodes, 4 resistors and 1 connector.
It belongs with the robotics & motion designs in this gallery.
From the project
pcb design of flight controller
Setup bill of materials (BOM)
9 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 4 | LED | LED_D3.0mm | D1, D2, D3, D4 |
| 4 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
Setup design files
The KiCad project lives in the ahmet140/flight-controller repository on GitHub; these links point at the commit this page was built from.
Setup: common questions
How big is the Setup PCB?
The Setup measures 61 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Setup?
9 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Setup design files?
From the ahmet140/flight-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Setup design in my own project?
The repository has no license, so all rights stay with ahmet140. Use it as a reference, and ask the author before reusing the design.
More boards in flight-controller
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979