CANsus
Aieda1l·CANsus·hardware/kicad/CAN_board.kicad_pcb
About the CANsus PCB
CANsus is an open source PCB design by Aieda1l, published on GitHub under the MIT license. It is a 2-layer board measuring 73.3 × 52.9 mm, with 11 components from 6 distinct parts.
By type, the board carries 6 connectors, 1 diode, 1 capacitor and 1 resistor.
It belongs with the robotics & motion designs in this gallery.
From the project
Iterated CAN, power, and auxiliary-signal distribution PCB for Newport Robotics Group (Team 948), designed in KiCad.
The files in this directory are the browsable v15 KiCad source snapshot that was originally committed to the repository. A separate supplied export set containing v10-v16 was compared to build the source-derived revision log.
The supplied schematic and PCB files report KiCad 8.0 generators.
- CANboard.kicadpro — project settings - CANboard.kicadsch — schematic - CANboard.kicadpcb — PCB layout - fp-lib-table — project footprint-library table - sym-lib-table — project symbol-library table
CANsus bill of materials (BOM)
11 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 2601-1104 | CONN4_2601-1104_WAG | J1, J2, J3, J4, J5 |
| 1 | 2601-1102 | CONN2_2601-1102_WAG | J7 |
| 2 | R-RJ45R08P-B000 | RJ45-TH_R-RJ45R08P-B000 | RJ1, RJ2 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | VT1C102M1010 | CAP-SMD_BD10.0-L10.3-W10.3-LS11.3-FD | C1 |
| 1 | R | R_1206_3216Metric | R1 |
CANsus design files
The KiCad project lives in the Aieda1l/CANsus repository on GitHub; these links point at the commit this page was built from.
CANsus: common questions
How big is the CANsus PCB?
The CANsus measures 73.3 × 52.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CANsus?
11 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CANsus design files?
From the Aieda1l/CANsus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CANsus design in my own project?
Yes, under the terms of its MIT license, which Aieda1l chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979