Board b routed freerouting raw

ajisrawi·passive-radar-counter-drone·hardware/board_b/route/board_b_routed_freerouting_raw.kicad_pcb

Board b routed freerouting raw layout, top view — open source board by ajisrawi

About the Board b routed freerouting raw

Board b routed freerouting raw is an open source PCB design by ajisrawi, published on GitHub. It is a 8-layer board measuring 150 × 105 mm, with 220 components from 40 distinct parts.

Other key parts include the AD9361BBCZ, TLV75525PDBVR, LMK1C1104PWR, TPS62130RGTR and ADP1755ACPZ-R7. By type, the board carries 124 capacitors, 58 resistors, 13 inductors, 9 ICs, 9 connectors and 6 transformers.

It belongs with the robotics & motion and rf & radio designs in this gallery.

From the project

Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure

A passive radar that finds small drones without transmitting anything. It listens to the digital TV, 4G and 5G signals already in the air. It compares each signal as it arrives straight from the tower with its faint echo off a drone, which gives range, speed and bearing. An on-board FPGA then tells drones from birds by their micro-Doppler: spinning rotors make different echo patterns from flapping wings.

Board b routed freerouting raw, from the project README
From the project README

Main components on the Board b routed freerouting raw

Board b routed freerouting raw bill of materials (BOM)

220 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
AD9361BBCZ
U1, U2, U3
1
TLV75525PDBVR
U4
1
LMK1C1104PWR
U5
1
TPS62130RGTR
U6
3
ADP1755ACPZ-R7
U7, U8, U9
1
40MHz TCXO 0.5ppm
Y1
1
FMC LPC (mezzanine)
J1
1
RF_IN0
J2
1
RF_IN1
J3
1
RF_IN2
J4
1
RF_IN3
J5
1
RF_IN4
J6
1
RF_IN5
J7
1
EXT_REF
J8
1
CAL_EN to board A
J9
6
ATB2012-50011
T1, T2, T3, T4, T5, T6
12
600R@100MHz
FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8 +4
1
2.2U
2.2u
L1
26
1u
C1, C7, C12, C14, C17, C19, C23, C29 +18
62
100N
100n
C2, C3, C4, C5, C6, C8, C9, C10 +54
Show 20 more
QtyPartRefs
12
100P
100p
C67, C68, C70, C71, C73, C74, C76, C77 +4
6
DNP
C69, C72, C75, C78, C81, C84
9
10U
10u
C86, C103, C105, C109, C111, C115, C117, C121 +1
1
3.3N
3.3n
C95
3
10U
10u
C96, C97, C120
2
22U
22u
C99, C100
3
10N
10n
C102, C108, C114
3
14.3K
14.3k
R1, R8, R11
3
22
R2, R9, R12
12
10K
10k
R3, R4, R5, R6, R7, R10, R13, R32 +4
13
DNP
R14, R16, R17, R19, R20, R22, R23, R25 +5
6
0
R15, R18, R21, R24, R27, R30
1
470
R34
1
1.5K
1.5k
R36
5
33
R37, R40, R43, R46, R57
3
120
R38, R41, R44
3
100
R39, R42, R45
1
125K
125k
R47
4
100K
100k
R48, R49, R56, R58
3
16K
16k
R50, R52, R54

Board b routed freerouting raw design files

The KiCad project lives in the ajisrawi/passive-radar-counter-drone repository on GitHub; these links point at the commit this page was built from.

Board b routed freerouting raw: common questions

How big is the Board b routed freerouting raw?

The Board b routed freerouting raw measures 150 × 105 mm, has 8 copper layers and is 1.6 mm thick.

How many components are on the Board b routed freerouting raw?

220 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Board b routed freerouting raw design files?

From the ajisrawi/passive-radar-counter-drone repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Board b routed freerouting raw design in my own project?

The repository has no license, so all rights stay with ajisrawi. Use it as a reference, and ask the author before reusing the design.

More boards in passive-radar-counter-drone

Similar boards