Sensor AIME
Akralan·Sensor_AIME·PCB/pcb_aime/pcb_aime.kicad_pcb
About the Sensor AIME PCB
Sensor AIME is an open source PCB design by Akralan, published on GitHub. It is a 2-layer board measuring 53.1 × 58 mm, with 17 components from 12 distinct parts.
Other key parts include the ltc1050acn8. By type, the board carries 7 resistors, 4 capacitors, 3 connectors, 1 IC, 1 buzzer and 1 diode.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
Description Générale : Le système permet de mesurer la concentration de gaz via un capteur dédié, de conditionner le signal et de transmettre les données via LoRa ou Bluetooth. L’utilisateur peut ensuite visualiser les mesures en temps réel et interagir avec le dispositif depuis
Description Générale : Le système permet de mesurer la concentration de gaz via un capteur dédié, de conditionner le signal et de transmettre les données via LoRa ou Bluetooth. L’utilisateur peut ensuite visualiser les mesures en temps réel et interagir avec le dispositif depuis une interface Node-RED ou une application mobile.
Résumé Fonctionnel : 1. Mesure de gaz via un capteur spécifique et circuits d’acquisition (amplification, filtrage). 2. Traitement et envoi des données par un microcontrôleur (ESP32). 3. Visualisation en temps réel sur Node-RED et application mobile (AppInventor).
Main components on the Sensor AIME
Sensor AIME bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ltc1050acn8 LTC1050ACN8_PBF | PDIP-8_N | U1 |
| 1 | Pin ESP | XCVR_ESP32-C3-DEVKITM-1 | J1 |
| 1 | Pin Capteur | GazSensor | J2 |
| 1 | Pin LoRa | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 3 | 100n | C_0805_2012Metric | C1, C2, C5 |
| 1 | 1u | C_0805_2012Metric | C3 |
| 3 | 1k | R_0805_2012Metric | R1, R5, R6 |
| 2 | 100k | R_0805_2012Metric | R2, R4 |
| 1 | 10k | R_0805_2012Metric | R3 |
| 1 | 100 | R_0805_2012Metric | R7 |
Sensor AIME design files
The KiCad project lives in the Akralan/Sensor_AIME repository on GitHub; these links point at the commit this page was built from.
Sensor AIME: common questions
How big is the Sensor AIME PCB?
The Sensor AIME measures 53.1 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor AIME?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensor AIME design files?
From the Akralan/Sensor_AIME repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensor AIME design in my own project?
The repository has no license, so all rights stay with Akralan. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k