HardLabs

PCB-design for temperature monitoring

aksanall·PCB-design-for-temperature-monitoring·TemperatureMonitoring/TemperatureMonitoring.kicad_pcb

PCB-design for temperature monitoring layout, top view — open source AVR/Arduino board by aksanall

About the PCB-design for temperature monitoring

PCB-design for temperature monitoring is an open source AVR/Arduino PCB design by aksanall, published on GitHub. It is a 2-layer board measuring 57 × 47 mm, with 14 components from 12 distinct parts.

Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. By type, the board carries 3 capacitors, 3 resistors, 2 connectors, 1 IC, 1 speaker and 1 switch.

It belongs with the sensors designs in this gallery.

From the project

A PCB layout was designed using KiCAD for temperature monitoring, ensuring efficiency and affordability through schematic-based design

"# PCB-design-for-temperature-monitoring"

Main components on the PCB-design for temperature monitoring

ATMEGA328P-PU

PCB-design for temperature monitoring bill of materials (BOM)

14 components, 12 distinct parts.

QtyPartRefs
1
ATMEGA328P-PU
U1
1
Conn_01x02_Pin
J1
1
Conn_01x08_Pin
J2
1
Speaker
LS1
1
SW_Push
SW1
1
Thermistor_NTC
TH1
1
TestPoint
TP1
1
LED
D1
3
100n
C1, C2, C3
1
100K
R1
1
330
R2
1
10K
R3

PCB-design for temperature monitoring design files

The KiCad project lives in the aksanall/PCB-design-for-temperature-monitoring repository on GitHub; these links point at the commit this page was built from.

PCB-design for temperature monitoring: common questions

What microcontroller does the PCB-design for temperature monitoring use?

The PCB-design for temperature monitoring is built around the ATMEGA328P-PU, from the AVR/Arduino family.

How big is the PCB-design for temperature monitoring?

The PCB-design for temperature monitoring measures 57 × 47 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-design for temperature monitoring?

14 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB-design for temperature monitoring design files?

From the aksanall/PCB-design-for-temperature-monitoring repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB-design for temperature monitoring design in my own project?

The repository has no license, so all rights stay with aksanall. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB-design for temperature monitoring without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards