Pokeyboardy

akshatbansaltech·Pokeyboardy·Pokeyboardy/PCB/Pokeyboardy.kicad_pcb

Pokeyboardy PCB layout, top view — open source board by akshatbansaltech

About the Pokeyboardy PCB

Pokeyboardy is an open source PCB design by akshatbansaltech, published on GitHub under the MIT license. It is a 2-layer board measuring 86.3 × 54.8 mm, with 17 components from 6 distinct parts.

Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 9 diodes, 6 switches, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

A 5-key macropad with a rotary encoder and RGB LEDs, built for the Hackpad YSWS

Pokeyboardy is a compact 5-key macropad built for Hack Club's Hackpad YSWS. It features five mechanical switches, a rotary encoder, RGB lighting, and support for a small OLED display, all powered by a Seeed Studio XIAO RP2040. The PCB, case, and knob were designed from scratch as part of the project.

- 5x Cherry MX switches - 1x EC11 rotary encoder - 3x SK6812 mini RGB LEDs - Seeed XIAO controller - OLED header

Pokeyboardy, from the project README
From the project README

Main components on the Pokeyboardy

Pokeyboardy bill of materials (BOM)

17 components, 6 distinct parts.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO
U1
1
OLED_DISPLAY
J1
5
Keyswitch
S1, S2, S3, S4, S5
1
RotaryEncoder_Switch
SW1
6
Diode
D1, D2, D3, D4, D5, D6
3
SK6812MINI-E
D8, D9, D10

Pokeyboardy design files

The KiCad project lives in the akshatbansaltech/Pokeyboardy repository on GitHub; these links point at the commit this page was built from.

Pokeyboardy: common questions

How big is the Pokeyboardy PCB?

The Pokeyboardy measures 86.3 × 54.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pokeyboardy?

17 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pokeyboardy design files?

From the akshatbansaltech/Pokeyboardy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pokeyboardy design in my own project?

Yes, under the terms of its MIT license, which akshatbansaltech chose for the repository.

Similar boards