ClockClock24-Replica

alang321·ClockClock24-Replica·PCB/kicad files/pcb rev1.kicad_pcb

ClockClock24-Replica PCB layout, top view — open source board by alang321

About the ClockClock24-Replica PCB

ClockClock24-Replica is an open source PCB design by alang321, published on GitHub. It is a 2-layer board measuring 336 × 46.1 mm, with 50 components from 10 distinct parts.

Other key parts include the VID66-06 and Maple_Mini. By type, the board carries 22 capacitors, 12 resistors, 4 crystals, 2 ICs, 1 module and 1 connector.

It belongs with the robotics & motion designs in this gallery.

From the project

Video of clock in action: https://photos.google.com/share/AF1QipM3veQpQ0XkVU6mXYjfI77cDL8gVcDZlROT0_qATZYPRnyIRZsuLHRsqtRsNTrixQ?key=c0U2SFBVdGpubVNTWW43WENBeFczdWVBSk5FbmZB

Video of clock in action: https://photos.google.com/share/AF1QipM3veQpQ0XkVU6mXYjfI77cDL8gVcDZlROT0_qATZYPRnyIRZsuLHRsqtRsNTrixQ?key=c0U2SFBVdGpubVNTWW43WENBeFczdWVBSk5FbmZB

A clock consiting of 24 X40 stepper motors. There are 6 pcb where 4 of the X40 steppers are on a pcb. On each PCB 2 X40 (so 4 steppers, since X40 are dual axle) are controlled by a VID6606 stepper controller, so 2 VID6606 per PCB. These 2 are controlled by 1 MapleMini STM32F103. These 6 modules are controlled by a single RasberryPi Pico running MicroPython, this Pico communicates with the modules over I2C and also a…

Main components on the ClockClock24-Replica

VID66-06Maple_Mini

ClockClock24-Replica bill of materials (BOM)

50 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
VID66-06
U1, U2
1
Maple_Mini
A1
4
X40
X1.1, X1.2, X2.1, X2.2
1
C474922
Conn_01x04_Female
J1
8
TLE4905L
H1.1L1, H1.1U1, H1.2L1, H1.2U1, H2.1L1, H2.1U1, H2.2L1, H2.2U2
2
22 uF
C1.1, C2.1
4
100 nF
C1.2, C1.3, C2.2, C2.3
16
4.7 nF
C1.4, C1.5, C1.6, C1.7, C1.8, C1.9, C1.10, C1.11 +8
2
5K
R1, R2
10
1K2
R1.1, R1.2, R1.3, R1.4, R1.5, R2.1, R2.2, R2.3 +2

ClockClock24-Replica design files

The KiCad project lives in the alang321/ClockClock24-Replica repository on GitHub; these links point at the commit this page was built from.

ClockClock24-Replica: common questions

How big is the ClockClock24-Replica PCB?

The ClockClock24-Replica measures 336 × 46.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ClockClock24-Replica?

50 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ClockClock24-Replica design files?

From the alang321/ClockClock24-Replica repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ClockClock24-Replica design in my own project?

The repository has no license, so all rights stay with alang321. Use it as a reference, and ask the author before reusing the design.

Similar boards