Alternator 555 timer
About the Alternator 555 timer PCB
Alternator 555 timer is an open source PCB design by alexanderenrique, published on GitHub. It is a 2-layer board measuring 38.1 × 25.4 mm, with 18 components from 16 distinct parts.
Other key parts include the TLC555CP. By type, the board carries 4 diodes, 4 capacitors, 4 resistors, 3 connectors, 1 IC and 1 transistor.
It belongs with the displays & leds designs in this gallery.
From the project
Smart Thunderbird vehicle electronics — ESP32 nodes, alternator delay, display, and tooling.
Electronics for the 1968 Thunderbird restomod — sensor nodes, in-dash display, alternator delay, programming tooling, and more.
Website: denton.works/microelectronics/T-bird_electronics
Active development is on the platformIO branch.
Main components on the Alternator 555 timer
Alternator 555 timer bill of materials (BOM)
18 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLC555CP | DIP-8_W7.62mm | U1 |
| 1 | FQD11P06TM | TO-252-2 | Q1 |
| 1 | I_In | Alex_1pin_065thou | J1 |
| 1 | I_out | Alex_1pin_065thou | J2 |
| 1 | GND_Conn | Alex_1pin_065thou | J3 |
| 1 | Fuse_Small | Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 2 | SZ1SMB15AT3G | D_SMB_Handsoldering | D1, D2 |
| 1 | G. LED | LED_D3.0mm_Clear | D3 |
| 1 | R. LED | LED_D3.0mm_Clear | D4 |
| 2 | 0.1UF 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3 |
| 1 | 47UF 47uF | CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 1UF 1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 220K 220k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 10K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 100K 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
Alternator 555 timer design files
The KiCad project lives in the alexanderenrique/smart_tbird repository on GitHub; these links point at the commit this page was built from.
Alternator 555 timer: common questions
How big is the Alternator 555 timer PCB?
The Alternator 555 timer measures 38.1 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Alternator 555 timer?
18 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Alternator 555 timer design files?
From the alexanderenrique/smart_tbird repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Alternator 555 timer design in my own project?
The repository has no license, so all rights stay with alexanderenrique. Use it as a reference, and ask the author before reusing the design.
atopile
AxxAxx
eez-open