4in1-ESC-STM32F407-DRV8323

alexWandugu·4in1-ESC-STM32F407-DRV8323·project files (kicad)/drone_esc_march_2026.kicad_pcb

4in1-ESC-STM32F407-DRV8323 PCB layout, top view — open source STM32 board by alexWandugu

About the 4in1-ESC-STM32F407-DRV8323 PCB

4in1-ESC-STM32F407-DRV8323 is an open source STM32 PCB design by alexWandugu, published on GitHub under the MIT license. It is a 4-layer board measuring 77.8 × 108.6 mm, with 172 components from 31 distinct parts.

Its main chip is the STM32F407VET6, from the STM32 family. Other key parts include the DRV8323RSRGZT. By type, the board carries 59 resistors, 50 capacitors, 26 diodes, 25 transistors, 5 ICs and 4 connectors.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

Open-source 4-in-1 Electronic Speed Controller (ESC) for quadcopter BLDC motors. Features STM32F407VET6, DRV8323RS gate driver, and MCG4D8N04YHE3-TP MOSFETs. Designed for 4S LiPo (up to ~7A continuous per motor).

High-performance 4-in-1 Electronic Speed Controller for BLDC motors in quadcopters/drones.

- Firmware Development - Implement full BLDC FOC / Trapezoidal control using STM32F407 - Support DShot600 / DShot1200 protocols - Current sensing and over-current protection - Telemetry (voltage, current, temperature, RPM) - DRV8323RS configuration via SPI - Sensorless startup and BEMF detection tuning - PID tuning for smooth throttle response

4in1-ESC-STM32F407-DRV8323, from the project README
From the project README

Main components on the 4in1-ESC-STM32F407-DRV8323

4in1-ESC-STM32F407-DRV8323 bill of materials (BOM)

172 components, 31 distinct parts.

QtyPartRefs
4
DRV8323RSRGZT
IC1, IC3, IC4, IC5
1
STM32F407VET6
IC2
24
MCG4D8N04YHE3-TP
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +16
1
IRF4905
Q25
4
Screw_Terminal_01x03
J1, J2, J3, J4
1
~
B1
1
SMAJ20CA
D1
24
1N4148WS
D2, D3, D4, D5, D6, D7, D8, D9 +16
1
D_Zener
D26
2
10u 1A
L1, L2
1
1000u
C1
7
47u 25V
C2, C3, C4, C6, C22, C33, C42
13
100n
C5, C13, C14, C15, C29, C30, C31, C36 +5
2
47u
C7, C23
2
22u 10V
C8, C24
4
100n 25V
C9, C25, C35, C44
4
0.1u
C10, C26, C34, C43
4
47u
C11, C27, C37, C46
4
2.2u
C12, C28, C38, C47
4
10u 25V
C16, C32, C41, C50
Show 11 more
QtyPartRefs
4
0.1u 10V
C17, C18, C19, C20
1
4.7u 10V
C21
1
10K
R1
1
1K
R2
2
10K
R3, R18
2
3.3K
R4, R19
4
10K
R5, R20, R33, R46
12
1K
R6, R7, R8, R21, R22, R23, R34, R35 +4
12
5m
R9, R12, R15, R24, R27, R30, R37, R40 +4
24
22
R10, R11, R13, R14, R16, R17, R25, R26 +16
1
10k
R59

4in1-ESC-STM32F407-DRV8323 design files

The KiCad project lives in the alexWandugu/4in1-ESC-STM32F407-DRV8323 repository on GitHub; these links point at the commit this page was built from.

4in1-ESC-STM32F407-DRV8323: common questions

What microcontroller does the 4in1-ESC-STM32F407-DRV8323 use?

The 4in1-ESC-STM32F407-DRV8323 is built around the STM32F407VET6, from the STM32 family.

How big is the 4in1-ESC-STM32F407-DRV8323 PCB?

The 4in1-ESC-STM32F407-DRV8323 measures 77.8 × 108.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 4in1-ESC-STM32F407-DRV8323?

172 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the 4in1-ESC-STM32F407-DRV8323 design files?

From the alexWandugu/4in1-ESC-STM32F407-DRV8323 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 4in1-ESC-STM32F407-DRV8323 design in my own project?

Yes, under the terms of its MIT license, which alexWandugu chose for the repository.

Can I test firmware for the 4in1-ESC-STM32F407-DRV8323 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards