15 open source boards using the DRV8323RSRGZT
Real designs built with the DRV8323RSRGZT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Before maze
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
Before maze
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02STM32
4in1-ESC-STM32F407-DRV8323
alexWandugu
77.8 × 108.6 mm172 parts4LMIT0STM32
Dshot esc-100a
Lucas-Poulos
80 × 68 mm160 parts4LNo license0STM32
Foc dev board
dganin-hw
108 × 81 mm109 parts4LNo license0ESP32
ESC3Phase
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
ESC3Phase
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
Nognd
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
Nognd
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
Pre routed
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
Pre routed
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
R7
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
R7
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
R7 nognd
odtu
100 × 90 mm109 parts4LCERN-OHL-S-2.02ESP32
R7 nognd
ekremturanfirat
100 × 90 mm109 parts4LCERN-OHL-S-2.02
How designs wire the DRV8323RSRGZT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the DRV8323RSRGZT connects to, and the resistors, capacitors and other passives placed on it.
- The CPL_3 pin has a series capacitor on 5 of 5 designs, most often 47 nF (then 100 nF).
- The CPH_4 pin has a series capacitor on 5 of 5 designs, most often 47 nF (then 100 nF).
- The NFAULT_28 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- The NC_46 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| FB_1pin 1 | Connected to: GND 40% · not connected 20% · a signal 40% |
|
| PGND_2pin 2 | Connected to: GND 100% | — |
| CPL_3pin 3 | Connected to: Signal 100% |
|
| CPH_4pin 4 | Connected to: Signal 100% |
|
| VCP_5pin 5 | Connected to: Signal 100% |
|
| VM_6pin 6 | Connected to: VBUS_PROT 80% · a signal 20% |
|
| VDRAIN_7pin 7 | Connected to: VBUS_PROT 80% · a signal 20% |
|
| GHA_8pin 8 | Connected to: Signal 100% |
|
| SHA_9pin 9 | Connected to: A connector 100% |
|
| GLA_10pin 10 | Connected to: Signal 100% |
|
| SPA_11pin 11 | Connected to: Signal 100% |
|
| GLB_15pin 15 | Connected to: Signal 100% |
|
| SHB_16pin 16 | Connected to: A connector 100% |
|
| GHB_17pin 17 | Connected to: Signal 100% |
|
| GHC_18pin 18 | Connected to: Signal 100% |
|
| SHC_19pin 19 | Connected to: A connector 100% |
|
| GLC_20pin 20 | Connected to: Signal 100% |
|
| SOC_23pin 23 | Connected to: The microcontroller 40% · not connected 20% |
|
| SOB_24pin 24 | Connected to: The microcontroller 40% · not connected 20% |
|
| SOA_25pin 25 | Connected to: The microcontroller 60% |
|
| VREF_26pin 26 | Connected to: 3.3V 80% · not connected 20% |
|
| DGND_27pin 27 | Connected to: GND 100% | — |
| NFAULT_28pin 28 | Connected to: The microcontroller 100% |
|
| SDO_29pin 29 | Connected to: The microcontroller 100% |
|
| NSCS_32pin 32 | Connected to: The microcontroller 100% |
|
| ENABLE_33pin 33 | Connected to: The microcontroller 80% |
|
| CAL_34pin 34 | Connected to: GND 60% · a signal 40% | — |
| AGND_35pin 35 | Connected to: GND 100% | — |
| DVDD_36pin 36 | Connected to: DVDD 80% · a signal 20% |
|
| INHA_37pin 37 | Connected to: The microcontroller 80% |
|
| INLA_38pin 38 | Connected to: The microcontroller 80% |
|
| INHB_39pin 39 | Connected to: The microcontroller 80% |
|
| INLB_40pin 40 | Connected to: The microcontroller 80% |
|
| INHC_41pin 41 | Connected to: The microcontroller 80% |
|
| INLC_42pin 42 | Connected to: The microcontroller 80% |
|
| BGND_43pin 43 | Connected to: GND 100% | — |
| CB_44pin 44 | Connected to: GND 40% · not connected 20% · a signal 40% |
|
| SW_45pin 45 | Connected to: Signal 60% · GND 40% |
|
| NC_46pin 46 | Connected to: Not connected 100% | — |
| VIN_47pin 47 | Connected to: VBAT 60% · GND 40% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Before maze by ekremturanfirat, Before maze by odtu, 4in1-ESC-STM32F407-DRV8323 by alexWandugu and Foc dev board by dganin-hw.
The DRV8323RSRGZT in open source designs
The gallery holds 15 open source boards using the DRV8323RSRGZT from 5 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 109 components.
100% use four copper layers or more, and 87% carry an open source license.
The most starred is ESC3Phase by odtu.
Parts used alongside the DRV8323RSRGZT
What boards using the DRV8323RSRGZT are built for
DRV8323RSRGZT: common questions
Where can I find a DRV8323RSRGZT reference design?
Each of the 15 boards on this page is a real design using the DRV8323RSRGZT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DRV8323RSRGZT CPL_3 pin connected?
The CPL_3 pin has a series capacitor on 5 of 5 designs, most often 47 nF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the DRV8323RSRGZT.
How is the DRV8323RSRGZT CPH_4 pin connected?
The CPH_4 pin has a series capacitor on 5 of 5 designs, most often 47 nF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the DRV8323RSRGZT.
What pull-up resistor is used on the DRV8323RSRGZT NFAULT_28 pin?
The NFAULT_28 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the DRV8323RSRGZT.
What parts are used alongside the DRV8323RSRGZT?
The ESP32-WROOM-32E-N4, INA240A1DR, LM74700QDBVRQ1, LMR38020FSDDAR and PTPS16890VMAR appear in the most repositories here.
Which microcontrollers do boards using the DRV8323RSRGZT use?
Most are built on ESP32 (12) and STM32 (3).
How big is a typical board using the DRV8323RSRGZT?
The median is 100 × 90 mm, and 0% are two-layer designs.
What is the most popular open source board using the DRV8323RSRGZT?
By GitHub stars, ESC3Phase by odtu, with 2 stars.
Can I simulate one of these boards using the DRV8323RSRGZT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.