HardLabs

ACM Y2020V0.1

align-racing-uia·align_canbus_module·ACM_pcb/01. KiCAD/ACM_Y2020V0.1/ACM_Y2020V0.1.kicad_pcb

ACM Y2020V0.1 PCB layout, top view — open source AVR/Arduino board by align-racing-uia

About the ACM Y2020V0.1 PCB

ACM Y2020V0.1 is an open source AVR/Arduino PCB design by align-racing-uia, published on GitHub. It is a 2-layer board measuring 18 × 22.5 mm, with 30 components from 20 distinct parts.

Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the MCP25625-x-SS and NCV890430MW50TXG. By type, the board carries 11 capacitors, 7 resistors, 3 ICs, 2 diodes, 2 inductors and 1 transistor.

From the project

- Introduction - Align Racing UiA - Rules for file structure - License

- Introduction - Align Racing UiA - Rules for file structure - License

This is the repository for Align Racing's formula student race car's different systems.

27.07.2019: - Added: Protection circuit - Added: Atmega Clock pass-through - Moved: External oscillator from MCP to Atmega.

28.07.2019: - Changed: Orientation of tag connector in schematics - Added: Connector with I/O - Added: Overcurrent protection with polyfuse - Added: Overvoltage protection with zener diode - Added: Reverse polarity protection with diode - Generated:Bill of Materials - Added: JAE IL-WX Series 0.8mm Pitch 30 Way…

ACM Y2020V0.1, from the project README
From the project README

Main components on the ACM Y2020V0.1

ATmega328P-AUMCP25625-x-SSNCV890430MW50TXG

ACM Y2020V0.1 bill of materials (BOM)

30 components, 20 distinct parts.

QtyPartRefs
1
ATmega328P-AU
U1
1
MCP25625-x-SS
U2
1
NCV890430MW50TXG
U3
1
Q_PMOS_DGS
Q1
1
16.0Mhz
Y1
1
Conn_02x15_Odd_Even
P1
1
250mA
F1
1
SMLP36RGB2W3R
LED1
1
15V
D1
1
2.4V
D2
1
10uH
L1
1
2.2 µH
L2
9
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +1
2
10uF
C10, C11
2
10K Ohm
R1, R6
1
100K Ohm
R2
1
200 Ohm
R3
1
290 Ohm
R4
1
190 Ohm
R5
1
120 Ohm
R7

ACM Y2020V0.1 design files

The KiCad project lives in the align-racing-uia/align_canbus_module repository on GitHub; these links point at the commit this page was built from.

ACM Y2020V0.1: common questions

What microcontroller does the ACM Y2020V0.1 use?

The ACM Y2020V0.1 is built around the ATmega328P-AU, from the AVR/Arduino family.

How big is the ACM Y2020V0.1 PCB?

The ACM Y2020V0.1 measures 18 × 22.5 mm, has 2 copper layers and is 1 mm thick.

How many components are on the ACM Y2020V0.1?

30 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the ACM Y2020V0.1 design files?

From the align-racing-uia/align_canbus_module repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ACM Y2020V0.1 design in my own project?

The repository has no license, so all rights stay with align-racing-uia. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ACM Y2020V0.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in align_canbus_module

Similar boards