BadIMSIRadio
About the BadIMSIRadio PCB
BadIMSIRadio is an open source PCB design by alisterwan, published on GitHub under the GPL-3.0 license. It is a board measuring 38 × 7.8 mm, with 34 components from 24 distinct parts.
Other key parts include the SKY13350 and LNA. By type, the board carries 11 capacitors, 7 resistors, 5 inductors, 4 connectors, 4 diodes and 3 ICs.
From the project
All dependencies we need to manipulate gnuradio gr-gsm etc...
This is a free hardware design; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.
This design is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
Main components on the BadIMSIRadio
BadIMSIRadio bill of materials (BOM)
34 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SKY13350 SWITCH | GSG-SOT143 | U1 |
| 1 | SKY13350 SAW | GSG-F5Q | U2 |
| 1 | LNA | GSG-TSLP-7-1 | U3 |
| 1 | 1V8 HACKRF | GSG-SMA-EDGE | P1 |
| 1 | ANTENNA | GSG-SMA-EDGE | P2 |
| 2 | CONN_1 | GSG-HOLE-62MIL-COPPER | P3, P4 |
| 2 | GSG-DIODE-TVS-BI | GSG-0402 | D1, D2 |
| 1 | PIN | GSG-SOD323 | D3 |
| 1 | LNALED | GSG-0603D | D4 |
| 2 | 39nH | GSG-0402 | L1, L4 |
| 3 | 10UH 39nH | GSG-0402 | L2, L3, L5 |
| 3 | 33PF 100pF | GSG-0402 | C1, C5, C7 |
| 1 | 10NF 100pF | GSG-0402 | C2 |
| 1 | 33PF 1nF | GSG-0402 | C3 |
| 2 | 10NF 1nF | GSG-0402 | C4, C6 |
| 1 | 22PF 100pF | GSG-0402 | C8 |
| 1 | 100NF 100pF | GSG-0402 | C9 |
| 2 | 33PF 1uF | GSG-0402 | C10, C11 |
| 1 | 470 47k | GSG-0402 | R1 |
| 1 | 470 100k | GSG-0402 | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22K 4k7 | GSG-0402 | R3 |
| 1 | 51K 100k | GSG-0402 | R4 |
| 2 | 10K 470 | GSG-0402 | R5, R7 |
| 1 | 10K 3k | GSG-0402 | R6 |
BadIMSIRadio design files
The KiCad project lives in the alisterwan/BadIMSIRadio repository on GitHub; these links point at the commit this page was built from.
BadIMSIRadio: common questions
How big is the BadIMSIRadio PCB?
The BadIMSIRadio measures 38 × 7.8 mm and is 1.6 mm thick.
How many components are on the BadIMSIRadio?
34 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BadIMSIRadio design files?
From the alisterwan/BadIMSIRadio repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the BadIMSIRadio design in my own project?
Yes, under the terms of its GPL-3.0 license, which alisterwan chose for the repository.