16 open source boards using the LNA

Real designs built with the LNA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the LNA

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the LNA connects to, and the resistors, capacitors and other passives placed on it.

  • The RFIN pin has a inductor on 14 of 15 designs, most often 39 nH (then 6.8 nH).
  • The GND pins have a inductor on 13 of 15 designs, most often 39 nH (then 390 nH).
  • The GND pins have a series capacitor on 13 of 15 designs, most often 100 pF.
  • The GND pins have a capacitor to GND on 12 of 15 designs, most often 1 µF.
RFINpin 1Connected to: VCC 80% · a signal 20%
  • Inductor on 93% · 39 nH (26), 6.8 nH (2)
GNDpin 2, 3Connected to: Signal 83% · GND 17%
  • Inductor on 87% · 39 nH (24), 390 nH (1)
  • Series capacitor on 87% · 100 pF (13)
  • Capacitor to GND on 80% · 1 µF (12)
RFOUTpin 4Connected to: Signal 100%
  • Series capacitor on 86% · 100 pF (12)
  • Inductor on 86% · 39 nH (12)
SHDNpin 5Connected to: VCC 100%
  • Inductor on 86% · 39 nH (29)
VDDpin 6Connected to: Signal 86%
  • Pull-up to VCC on 86% · 3 kΩ (12)
Pin 7Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LNA915 by Charmve, Minino by ElectronicCats, BadIMSIRadio by alisterwan and LNA915 by alexmfz.

The LNA in open source designs

The gallery holds 16 open source boards using the LNA from 15 GitHub repositories; a typical one measures about 38 × 8.7 mm and carries around 32 components.

67% use four copper layers or more, and 75% carry an open source license.

The most starred is LNA915 by Charmve.

Microcontrollers on boards using the LNA

What boards using the LNA are built for

LNA: common questions

Where can I find a LNA reference design?

Each of the 16 boards on this page is a real design using the LNA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LNA RFIN pin connected?

The RFIN pin has a inductor on 14 of 15 designs, most often 39 nH (then 6.8 nH). Counted from the KiCad layouts of 15 open source designs using the LNA.

How is the LNA GND pin connected?

The GND pins have a inductor on 13 of 15 designs, most often 39 nH (then 390 nH). Counted from the KiCad layouts of 15 open source designs using the LNA.

How is the LNA RFOUT pin connected?

The RFOUT pin has a series capacitor on 12 of 14 designs, most often 100 pF. Counted from the KiCad layouts of 15 open source designs using the LNA.

What parts are used alongside the LNA?

The SKY13350, SAW, Switch, ESP32-C6-WROOM-1U-N8 and GPS appear in the most repositories here.

Which microcontrollers do boards using the LNA use?

Most are built on ESP32 (3) and STM32 (1).

How big is a typical board using the LNA?

The median is 38 × 8.7 mm, and 33% are two-layer designs.

What is the most popular open source board using the LNA?

By GitHub stars, LNA915 by Charmve, with 354 stars.

Can I simulate one of these boards using the LNA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part