40 open source boards using the SKY13350
Real designs built with the SKY13350, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Hackrf one
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
Marzipan
Josephrp
120 × 75 mm416 partsCustom license12BadIMSIRadio
alisterwan
38 × 7.8 mm34 partsGPL-3.05NXP
Marzipan
alexmfz
120 × 75 mm416 partsGPL-2.03FPGA
Noob sdr
ainnovators
130.3 × 100 mm473 partsGPL-3.01NXP
Marzipan
JensLiu
120 × 75 mm416 partsGPL-2.01NXP
Marzipan
greearb
120 × 75 mm416 partsGPL-2.01Hackrf
MisterDr
38 × 7.8 mm34 partsGPL-2.01Hack rf repository
Hotaru009
38 × 7.8 mm34 partsGPL-2.01NXP
Hackrf one
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
deepin-community
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Marzipan
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
HackRF One
alexmfz
120 × 75 mm415 partsGPL-2.03NXP
Marzipan
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Marzipan
2ftg
120 × 75 mm416 partsGPL-2.00Neapolitan
Charmve
120 × 75 mm290 partsBSD-2-Clause354Neapolitan
Josephrp
120 × 75 mm290 partsCustom license12Neapolitan
alexmfz
120 × 75 mm290 partsGPL-2.03Neapolitan
greearb
120 × 75 mm290 partsGPL-2.01Neapolitan
JensLiu
120 × 75 mm290 partsGPL-2.01Neapolitan
Toysoft
120 × 75 mm290 partsGPL-2.00Neapolitan
deepin-community
120 × 75 mm290 partsGPL-2.00Neapolitan
zqupc
120 × 75 mm290 partsGPL-2.00Neapolitan
2ftg
120 × 75 mm290 partsGPL-2.00Operacake
Meteora-Z
120 × 75 mm152 partsNo license0Operacake
Charmve
120 × 75 mm152 partsBSD-2-Clause354Operacake
alexmfz
120 × 75 mm152 partsGPL-2.03Operacake
Toysoft
120 × 75 mm152 partsGPL-2.00Operacake
2ftg
120 × 75 mm152 partsGPL-2.00LNA915
zqupc
38 × 7.8 mm32 partsGPL-2.00LNA915
Meteora-Z
38 × 7.8 mm32 partsNo license0
How designs wire the SKY13350
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the SKY13350 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 4 has a series capacitor on 14 of 14 designs, most often 22 pF (then 100 pF).
- Pin 1 has a capacitor to GND on 11 of 14 designs, most often 33 pF (then 10 nF).
- Pin 2 has a series capacitor on 11 of 14 designs, most often 22 pF.
- Pin 5 has a capacitor to GND on 11 of 11 designs, most often 33 pF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: SKY13317 71%, SKY13350 71%, LPC43XXFBD144 43% |
|
| Pin 2 | Connected to: Signal 79% · GND 21% |
|
| Pin 3 | Connected to: GND 79% · a signal 21% | — |
| Pin 4 | Connected to: Signal 100% |
|
| Pin 5 | Connected to: A connector 100%, SKY13350 91%, LPC43XXFBD144 64% |
|
| Pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, Marzipan by Josephrp, BadIMSIRadio by alisterwan and HackRF One by alexmfz.
The SKY13350 in open source designs
The gallery holds 40 open source boards using the SKY13350 from 14 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 290 components.
100% use four copper layers or more, and 85% carry an open source license.
The most starred is Hackrf one by Charmve.
Parts used alongside the SKY13350
What boards using the SKY13350 are built for
SKY13350: common questions
Where can I find a SKY13350 reference design?
Each of the 40 boards on this page is a real design using the SKY13350. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SKY13350 pin 4 connected?
Pin 4 has a series capacitor on 14 of 14 designs, most often 22 pF (then 100 pF). Counted from the KiCad layouts of 14 open source designs using the SKY13350.
How is the SKY13350 pin 1 connected?
Pin 1 has a capacitor to GND on 11 of 14 designs, most often 33 pF (then 10 nF). Counted from the KiCad layouts of 14 open source designs using the SKY13350.
How is the SKY13350 pin 2 connected?
Pin 2 has a series capacitor on 11 of 14 designs, most often 22 pF. Counted from the KiCad layouts of 14 open source designs using the SKY13350.
What parts are used alongside the SKY13350?
The MAX2837, MAX5864, MGA-81563, RFFC5072 and RX_HIGHPASS_FILTER appear in the most repositories here.
Which microcontrollers do boards using the SKY13350 use?
Most are built on NXP (16) and FPGA (1).
How big is a typical board using the SKY13350?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the SKY13350?
By GitHub stars, Hackrf one by Charmve, with 354 stars.
Can I simulate one of these boards using the SKY13350 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.