HardLabs

STM32 DS2480 USB Stick

alitekin2fx·stm32_ds2480_emu·hardware/stm32_ds2480_emu.kicad_pcb

STM32 DS2480 USB Stick PCB layout, top view — open source STM32 board by alitekin2fx

About the STM32 DS2480 USB Stick PCB

STM32 DS2480 USB Stick is an open source STM32 PCB design by alitekin2fx, published on GitHub. It is a 2-layer board measuring 33 × 14 mm, with 24 components from 20 distinct parts.

Its main chip is the STM32F042F6P6, from the STM32 family. Other key parts include the USBLC6-2SC6 and AP2204K-3.3TRG1. By type, the board carries 7 resistors, 4 capacitors, 3 ICs, 3 connectors, 3 diodes and 2 jumpers.

From the project

DS2480 / DS2480B emulation project

Main components on the STM32 DS2480 USB Stick

USBLC6-2SC6STM32F042F6P6AP2204K-3.3TRG1

STM32 DS2480 USB Stick bill of materials (BOM)

24 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U1
1
STM32F042F6P6
STM32F042F6Px
U2
1
AP2204K-3.3TRG1
AP2204K-3.3
U3
1
SI2302CDS-T1-GE3
SI2302CDS
Q1
1
OW
J1
1
DS1098-WN0
USB_A
J2
1
SWD
J3
1
MF-PSMF010X-2
Polyfuse
F1
1
PUP
JP1
1
DFU
JP2
1
LTST-C190KGKT
LED1
D1
1
LTST-C191KRKT
LED2
D2
1
BZX84C5V1-HT
5.1V
D3
2
CL10B104KB8NNNC
100nF
C1, C2
1
CL10A225KO8NNNC
2.2uF
C3
1
CL10A105KO8NNNC
1uF
C4
2
0603SAJ0101T5E
100R
R1, R2
1
0805S8J0222T5E
2.2K
R3
2
0805S8J047JT5E
4.7R
R4, R7
2
0603SAJ0103T5E
10K
R5, R6

STM32 DS2480 USB Stick design files

The KiCad project lives in the alitekin2fx/stm32_ds2480_emu repository on GitHub; these links point at the commit this page was built from.

STM32 DS2480 USB Stick: common questions

What microcontroller does the STM32 DS2480 USB Stick use?

The STM32 DS2480 USB Stick is built around the STM32F042F6P6, from the STM32 family.

How big is the STM32 DS2480 USB Stick PCB?

The STM32 DS2480 USB Stick measures 33 × 14 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32 DS2480 USB Stick?

24 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32 DS2480 USB Stick design files?

From the alitekin2fx/stm32_ds2480_emu repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32 DS2480 USB Stick design in my own project?

The repository has no license, so all rights stay with alitekin2fx. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32 DS2480 USB Stick without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in stm32_ds2480_emu

Similar boards