13 open source boards using the STM32F042F6P6

Real designs built with the STM32F042F6P6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the STM32F042F6P6

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the STM32F042F6P6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 4.7 µF).
  • The PB8 pin has a resistor to GND on 8 of 10 designs, most often 10 kΩ (then 68 kΩ).
  • The VDDA pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF).
  • The NRST pin has a capacitor to GND on 6 of 10 designs, most often 100 nF.
PB8pin 1Connected to: Signal 90%
  • Resistor to GND on 80% · 10 kΩ (7), 68 kΩ (1)
PF0pin 2Connected to: A connector 30% · not connected 30%
  • Pull-up to 3.3V on 40% · 4.7 kΩ (2), 2.2 kΩ (1), 3.3 kΩ (1)
PF1pin 3Connected to: A connector 30% · not connected 40%
  • Pull-up to 3.3V on 40% · 4.7 kΩ (2), 2.2 kΩ (1), 3.3 kΩ (1)
NRSTpin 4Connected to: A connector 70%
  • Capacitor to GND on 60% · 100 nF (6)
  • Pull-up to 3.3V on 40% · 10 kΩ (4)
VDDApin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 70% · 100 nF (5), 1 µF (3), 10 nF (3)
PA0pin 6Connected to: Signal 100%
  • Series resistor on 30% · 100 Ω (1), 10 kΩ (1), 330 Ω (1)
PA1pin 7Connected to: Signal 100%
  • Resistor to GND on 30% · 100 kΩ (1), 20 kΩ (1), 10 kΩ (1)
PA2pin 8Connected to: A connector 30% · not connected 30%
  • Pull-up to 3.3V on 30% · 10 kΩ (2), 3.3 kΩ (1)
PA3pin 9Connected to: A connector 30% · not connected 20%
  • Pull-up to 3.3V on 30% · 10 kΩ (2), 3.3 kΩ (1)
PB1pin 14Connected to: Not connected 70% · a signal 30%
VSSApin 15Connected to: GND 100%
VDDpin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 90% · 100 nF (6), 4.7 µF (4), 10 µF (2)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Relaymux by PetteriAimonen, STM32 DS2480 USB Stick by alitekin2fx, Lcd f042 by Novin3dp and IMU by abstractfoundry.

The STM32F042F6P6 in open source designs

The gallery holds 13 open source boards using the STM32F042F6P6 from 10 GitHub repositories; a typical one measures about 65.2 × 40 mm and carries around 28 components.

92% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.

The most starred is Relaymux by PetteriAimonen.

Parts used alongside the STM32F042F6P6

Microcontrollers on boards using the STM32F042F6P6

STM32F042F6P6: common questions

Where can I find a STM32F042F6P6 reference design?

Each of the 13 boards on this page is a real design using the STM32F042F6P6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F042F6P6 VDD pin?

The VDD pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the STM32F042F6P6.

What resistor goes on the STM32F042F6P6 PB8 pin?

The PB8 pin has a resistor to GND on 8 of 10 designs, most often 10 kΩ (then 68 kΩ). Counted from the KiCad layouts of 10 open source designs using the STM32F042F6P6.

What decoupling capacitors do designs use on the STM32F042F6P6 VDDA pin?

The VDDA pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the STM32F042F6P6.

Which microcontrollers do boards using the STM32F042F6P6 use?

Most are built on STM32 (13).

How big is a typical board using the STM32F042F6P6?

The median is 65.2 × 40 mm, and 92% are two-layer designs.

What is the most popular open source board using the STM32F042F6P6?

By GitHub stars, Relaymux by PetteriAimonen, with 18 stars.

Can I simulate one of these boards using the STM32F042F6P6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part