FlexiBMS hardware
alksdesu·FlexiBMS_hardware
About the FlexiBMS hardware PCB
FlexiBMS hardware is an open source STM32 PCB design by alksdesu, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 65 × 35 mm, with 204 components from 56 distinct parts.
Its main chip is the STM32L433CCT6, from the STM32 family. Other key parts include the AP2210N-3.3, LTC6803-3, MAX17502F, ISL28022 and LTC3873. By type, the board carries 76 resistors, 50 capacitors, 35 diodes, 17 transistors, 9 ICs and 8 connectors.
From the project
This project was inspired by Raphael Chang's Battman project's hardware design (https://github.com/raphaelchang/battman-hardware)
This project was inspired by Raphael Chang's Battman project's hardware design (https://github.com/raphaelchang/battman-hardware)
More current news and happening related to this project can be found and followed over at the project thread at the electic-skateboard.builders forum: http://www.electric-skateboard.builders/t/flexibms-0-2-hw-under-work-flexible-configuration-and-charging-bms/46117
Main components on the FlexiBMS hardware
FlexiBMS hardware bill of materials (BOM)
204 components, 56 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | AP2210N-3.3 | SOT-23 | U1, U9 |
| 1 | STM32L433CCT6 | LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | LTC6803-3 | FSOP-44_5.3x13.0mm_Pitch0.5mm | U3 |
| 1 | MAX17502F | DFN-10-1EP_2x3mm_Pitch0.5mm | U4 |
| 1 | ISL28022 | MSOP-10_3x3mm_Pitch0.5mm | U5 |
| 1 | LTC3873 | TSOT-23-8 | U6 |
| 1 | MAX5215 | MSOP-8_3x3mm_Pitch0.65mm | U7 |
| 1 | TCAN330 | SOT-23-8 | U8 |
| 1 | DMP6023LE-13 | SOT-223-3_TabPin2 | Q1 |
| 1 | DMN55D0UT-7 | SOT-523 | Q2 |
| 2 | PMV50XPR | SOT-23 | Q3, Q4 |
| 12 | BSS84PW | SOT-323_SC-70 | Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 +4 |
| 1 | BSZ100N06NSATMA1 | PG-TDSON-8 | Q17 |
| 1 | Conn_02x08_Odd_Even | Pin_Header_Straight_2x08_Pitch2.54mm | J1 |
| 1 | USB_OTG | USB_Micro-B_Molex_47346-0001 | J2 |
| 1 | Conn_02x02 | Socket_Strip_Straight_2x02_Pitch2.54mm_SMD | J3 |
| 2 | JST_SMD_PH-04 | JST_PH_B4B-PH-SM4-TB_04x2.00mm_Straight | J4, J5 |
| 1 | JST_XH-13 | JST_XH_S13B-XH-A_13x2.50mm_Angled | J6 |
| 2 | GS3 | GS3 | J7, J8 |
| 1 | Speaker | CSS-0575 | LS1 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SW_Push | SW_SPST_PTS810 | SW1, SW2 |
| 1 | 10k | R_0603 | TH2 |
| 1 | 12V | D_SOD-323 | D1 |
| 15 | LED | LED_0603 | D2, D3, D7, D9, D11, D13, D15, D17 +7 |
| 2 | CUS520 | D_SOD-323 | D4, D35 |
| 1 | 62V | D_SOD-123 | D5 |
| 12 | 7V5 | D_SOD-323 | D6, D8, D10, D12, D14, D16, D18, D20 +4 |
| 1 | 53Vwm | D_SMA | D30 |
| 1 | 3,3Vwm | D_SOD-123F | D31 |
| 2 | FSV1060V | TO-277A | D32, D33 |
| 3 | BLM31PG330SN1L | L_1206 | L1, L2, L4 |
| 1 | 22µ | L_1210 | L3 |
| 1 | 22µ,6.3A | HC9 | L5 |
| 18 | 2µ2,16V | C_0603 | C1, C3, C5, C6, C7, C9, C11, C12 +10 |
| 5 | 2µ2,100V | C_1210 | C2, C4, C63, C64, C65 |
| 21 | 100n,100V | C_0603 | C8, C10, C13, C14, C15, C16, C17, C18 +13 |
| 1 | 1µ,63V | C_1210 | C26 |
| 1 | 47µ,6V3 | C_1206 | C29 |
| 1 | 6n8,50V | C_0603 | C35 |
| 1 | 10µ,16V | C_1206 | C36 |
| 1 | 100µ,35V | CP_Elec_6.3x7.7 | C40 |
| 1 | 100µ,63V | CP_Elec_10x10 | C41 |
| 3 | 36k | R_0603 | R1, R72, R74 |
| 3 | 510k | R_0603 | R2, R3, R71 |
| 5 | 1M | R_0603 | R4, R6, R21, R23, R25 |
| 2 | 51k | R_0603 | R5, R7 |
| 2 | 220k | R_0603 | R8, R17 |
| 6 | 10k | R_0603 | R9, R10, R15, R16, R18, R67 |
| 5 | 4k7 | R_0603 | R11, R12, R19, R24, R68 |
| 8 | 120R | R_0603 | R13, R14, R20, R22, R26, R73, R76, R77 |
| 25 | 120R | R_0402 | R27, R28, R30, R31, R33, R34, R36, R37 +17 |
| 12 | 51R | R_0805 | R29, R32, R35, R38, R41, R44, R47, R50 +4 |
| 2 | 10R | R_0603 | R64, R65 |
| 1 | 10m | R_1206 | R66 |
| 1 | 15m | R_1206 | R69 |
| 1 | 18k | R_0603 | R70 |
FlexiBMS hardware design files
The KiCad project lives in the alksdesu/FlexiBMS_hardware repository on GitHub; these links point at the commit this page was built from.
- LayoutFlexiBMS.kicad_pcb
- BOMFlexiBMS_BOM.csv
FlexiBMS hardware: common questions
What microcontroller does the FlexiBMS hardware use?
The FlexiBMS hardware is built around the STM32L433CCT6, from the STM32 family.
How big is the FlexiBMS hardware PCB?
The FlexiBMS hardware measures 65 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the FlexiBMS hardware?
204 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FlexiBMS hardware design files?
From the alksdesu/FlexiBMS_hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the FlexiBMS hardware design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the FlexiBMS hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k