2 open source boards using the MAX17502F
Real designs built with the MAX17502F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32FlexiBMS hardware
SimosMCmuffin
65 × 35 mm204 parts4LCC-BY-NC-4.014
STM32FlexiBMS hardware
alksdesu
65 × 35 mm204 parts4LCC-BY-NC-4.00
The MAX17502F in open source designs
The gallery holds 2 open source boards using the MAX17502F from 2 GitHub repositories; a typical one measures about 65 × 35 mm and carries around 204 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is FlexiBMS hardware by SimosMCmuffin.
Parts used alongside the MAX17502F
Microcontrollers on boards using the MAX17502F
What boards using the MAX17502F are built for
MAX17502F: common questions
Where can I find a MAX17502F reference design?
Each of the 2 boards on this page is a real design using the MAX17502F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MAX17502F?
The AP2210N-3.3, ISL28022, LTC3873, LTC6803-3 and MAX5215 appear in the most repositories here.
Which microcontrollers do boards using the MAX17502F use?
Most are built on STM32 (2).
How big is a typical board using the MAX17502F?
The median is 65 × 35 mm, and 0% are two-layer designs.
What is the most popular open source board using the MAX17502F?
By GitHub stars, FlexiBMS hardware by SimosMCmuffin, with 14 stars.
Can I simulate one of these boards using the MAX17502F before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.