Radio keychain

alx-alexpark·radio-keychain·pcb/pocketradio.kicad_pcb

Radio keychain PCB layout, top view — open source RISC-V board by alx-alexpark

About the Radio keychain PCB

Radio keychain is an open source RISC-V PCB design by alx-alexpark, published on GitHub. It is a 2-layer board measuring 30 × 30 mm, with 36 components from 21 distinct parts.

Its main chip is the CH32V003F4U6, from the RISC-V family. Other key parts include the TPA6130A2RTJR and SI4702-C19-GMR. By type, the board carries 11 resistors, 9 capacitors, 5 switches, 3 ICs, 3 inductors and 2 connectors.

It belongs with the rf & radio designs in this gallery.

From the project

It uses the connected headphones as an antenna, and is powered off a CR2032 coin cell. The FM tuner used is the Si4702, which supports the 76-108MHz frequency range.

It uses the connected headphones as an antenna, and is powered off a CR2032 coin cell. The FM tuner used is the Si4702, which supports the 76-108MHz frequency range.

Based on the CH32v003, this radio runs on RISC-V!

Radio keychain, from the project README
From the project README

Main components on the Radio keychain

Radio keychain bill of materials (BOM)

36 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH32V003F4U6
U1
1
TPA6130A2RTJR
Texas Instruments
U2
1
SI4702-C19-GMR
SKYWORKS/SILICON LABS
U3
1
PJ-320D
SHOU HAN
CN1
1
CONN_01X03_PIN
Conn_01x03_Pin
J1
1
MY-2032-12
MYOUNG
BT1
1
SX2M32_768KM20F30TNN
Shenzhen SCTF Elec
OSC1
4
SW_PUSH_45DEG
SW_Push_45deg
SW1, SW2, SW3, SW4
1
K3-2235S-F1
Korean Hroparts Elec
SW5
1
LED
D1
2
BLM18BD252SN1D
FB1, FB2
1
LQW18ANR27J00D
L1
2
100NF
100nF
C1, C6
1
100PF
100pF
C2
2
0.47UF
0.47uF
C3, C4
3
1UF
1uF
C5, C7, C8
1
22NF
22nF
C9
6
10K
10k
R1, R2, R3, R4, R5, R6
2
2.2K
2.2k
R7, R8
2
2k
R9, R10
Show 1 more
QtyPartRefs
1
330
R11

Radio keychain design files

The KiCad project lives in the alx-alexpark/radio-keychain repository on GitHub; these links point at the commit this page was built from.

Radio keychain: common questions

What microcontroller does the Radio keychain use?

The Radio keychain is built around the CH32V003F4U6, from the RISC-V family.

How big is the Radio keychain PCB?

The Radio keychain measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Radio keychain?

36 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Radio keychain design files?

From the alx-alexpark/radio-keychain repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Radio keychain design in my own project?

The repository has no license, so all rights stay with alx-alexpark. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Radio keychain without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

Similar boards