MAS306 Drone G12
AMLing2·MAS306_Drone_G12·CircuitDesign/arenaPCBv2/arenaPCBv2.kicad_pcb
About the MAS306 Drone G12 PCB
MAS306 Drone G12 is an open source PCB design by AMLing2, published on GitHub. It is a 2-layer board measuring 86 × 67 mm, with 25 components from 19 distinct parts.
By type, the board carries 9 connectors, 6 capacitors, 4 resistors, 2 ICs, 2 diodes and 1 transistor.
It belongs with the robotics & motion designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Video from BSc. thesis, edited by Thomas Lønne Stiansen: \ https://youtu.be/jgXzDRpN-2Y?si=vNdUQDb9o-jMdF8C

MAS306 Drone G12 bill of materials (BOM)
25 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ~ | CONN_BREAKOUT_BOARDS | U1, U2 |
| 1 | BSC007N04LS6 | PG-TDSON-8-6_INF | Q1 |
| 1 | ~ | CONN_MTA_100_2 | J1 |
| 2 | ~ | B4B-ZR-SM4-TFT | J2, J4 |
| 1 | ~ | B2B-ZR-SM4-TFT | J3 |
| 1 | ~ | led_header_p2.54_2pin | J5 |
| 1 | ~ | TERMINAL_BLOCK_5081 | J6 |
| 1 | ~ | CONN_MTA_100_4 | J7 |
| 1 | ~ | CONN_MTA_100_6 | J8 |
| 1 | ~ | CONN_MOLEX_18p_2.00mm | J9 |
| 1 | 2920L600/12MRn | Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F1 |
| 2 | S12GCH | S12GCH | D1, D2 |
| 1 | 220uF | CP_Elec_10x10.5 | C1 |
| 1 | 100uF | CP_Elec_10x10.5 | C2 |
| 2 | 10uF | CP_Elec_6.3x4.5 | C3, C6 |
| 2 | 100nF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C4, C5 |
| 1 | 3K3 | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1 |
| 2 | 2K2 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2, R3 |
| 1 | 330R | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R4 |
MAS306 Drone G12 design files
The KiCad project lives in the AMLing2/MAS306_Drone_G12 repository on GitHub; these links point at the commit this page was built from.
MAS306 Drone G12: common questions
How big is the MAS306 Drone G12 PCB?
The MAS306 Drone G12 measures 86 × 67 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the MAS306 Drone G12?
25 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the MAS306 Drone G12 design files?
From the AMLing2/MAS306_Drone_G12 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MAS306 Drone G12 design in my own project?
The repository has no license, so all rights stay with AMLing2. Use it as a reference, and ask the author before reusing the design.
Earlier revisions in the repo: arenaPCBv1
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979