Ignyte fpa

andre-llaneta·ignyte-fpa·hardware/motherV1/motherV1.kicad_pcb

Ignyte fpa PCB layout, top view — open source board by andre-llaneta

About the Ignyte fpa PCB

Ignyte fpa is an open source PCB design by andre-llaneta, published on GitHub. It is a 2-layer board measuring 130 × 90 mm, with 31 components from 27 distinct parts.

By type, the board carries 26 connectors, 3 capacitors and 2 switches.

It belongs with the sensors, robotics & motion and test & measurement designs in this gallery.

From the project

Supporting firmware for the NYU Tandon IgNYte Lab fire propagation apparatus (FPA), including sensor acquisition, motorized camera-stage control, and instrument interfacing for an experimental platform informed by ISO 4589-2, ASTM D2863, and NASA STD-6001B.

motherV1 is a fabricated and tested custom DAQ/interface motherboard for the IgNYte-FPA ESP32-P4 sensor hub. It consolidates the apparatus support electronics onto one PCB, mounting the FireBeetle 2 ESP32-P4, sensor breakout interfaces, TMC2209 stepper-driver interface, RS232 flow-controller interfaces, and 20 V / 5 V / 3.3 V power distribution used for fire-propagation apparatus bring-up and firmware integration.

Ignyte fpa, from the project README
From the project README

Ignyte fpa bill of materials (BOM)

31 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C22373904
FireBeetle 2
J1
1
C22373900
Firebeetle 2
J2
1
TPS62827
J5
1
MPM3610
J6
1
C89120
Power
J7
1
C22373895
Thermocouple 1
J8
1
C160404
I2C Sensor 1
J9
1
C160404
I2C Sensor 2
J10
1
C160405
SPI Sensor 1
J11
1
C160405
SPI Sensor 2
J12
1
C160403
Analog 1
J13
1
C160403
Analog 2
J14
1
C22373895
Thermocouple 2
J15
1
C22373895
Thermocouple 3
J16
1
C22373895
Thermocouple 4
J17
1
TMC2209
J18
2
C22373892
RS232 LV
J19, J21
2
C22373892
RS232 HV
J20, J22
2
C22373895
DE9 2
J24, J29
1
C160404
I2C Sensor 3
J25
Show 7 more
QtyPartRefs
1
C160404
I2C Sensor 4
J26
1
C22373899
Expander L
J27
1
C22373899
Expander R
J28
1
C431540
5V
SW1
1
3.3V
SW2
2
47UF
47uF
C1, C3
1
22UF
22uF
C2

Ignyte fpa design files

The KiCad project lives in the andre-llaneta/ignyte-fpa repository on GitHub; these links point at the commit this page was built from.

Ignyte fpa: common questions

How big is the Ignyte fpa PCB?

The Ignyte fpa measures 130 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ignyte fpa?

31 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ignyte fpa design files?

From the andre-llaneta/ignyte-fpa repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ignyte fpa design in my own project?

The repository has no license, so all rights stay with andre-llaneta. Use it as a reference, and ask the author before reusing the design.

Similar boards